Rear brake master-cylinder mounts kit for BMW F650 Funduro 1996–1999

This model-specific fixing kit contains 2 pieces for the BMW F650 Funduro E169 1996–1999, 652 cc, with the matching original fitting arrangement shown in the location diagram.

This kit covers the two listed master-cylinder mounting bolts only. The reservoir collar screw and hydraulic components are excluded.

Why choose a model-specific fixing kit?

The kit is organised around the listed fixing positions. Original BMW references and diagram item numbers let you cross-reference each supplied component with its location. The illustrated cap head bolts are the supplied replacement style where original hex-head or flange bolts are replaced.

What you receive

2 cap head bolts. Total: 2 pieces.

Model-specific kit contents

Supplied component	Quantity	Size	Original BMW reference / position	Diagram item
Cap head bolts	2	M6x20	13712343300	8

Original references identify the fixing positions. Supplied components are aftermarket replacements and are not genuine BMW-branded stock.

Component styles and location diagram

The model-specific diagram identifies the included positions with orange numbers and highlights. Photographs beside the references illustrate the supplied component styles. The original assembly drawing remains visible so the fixing locations can be identified.

This is a position-specific set, rather than an assortment of spare bolts. Our generic versus model-specific motorcycle bolt kit guide explains why fixing allocation, head style and associated hardware matter when comparing kits.

When should you replace these fixings?

Check the listed fixings when working on this area. Missing fasteners or damaged heads and threads should be addressed before reassembly. Replacement hardware does not repair damaged mounting threads or components.

For inspection guidance, read when to replace motorcycle bolts, including damaged drives, worn threads and manufacturer replacement requirements.

Fitment and coverage

For BMW F650 Funduro E169 1996–1999, 652 cc, with the matching original arrangement shown. Check the model, fitted components and original fixing positions before ordering. The motorcycle, assemblies and unlisted hardware are not supplied.

Drive type

The supplied cap head bolts use an Allen (hex socket) drive.

Fitting information

Keep each fixing identified by its original position. Match the supplied components to the original fitting arrangement and follow the BMW workshop procedure and specification for that position.

Read our guide to fitting stainless steel motorcycle bolts for general information about thread condition, galling and thread treatments. It does not provide BMW torque specifications; use the workshop requirements for the exact fixing position.

Delivery and returns

Free UK delivery to UK addresses. See our returns policy.

Customer questions

Are hydraulic pipe bolts included in this set?

No. This set contains two mounting bolts for item 8. Banjo bolts, copper sealing washers and the unconfirmed collar screw at item 9 are excluded.

Does this include every fixing on the motorcycle?

No. This kit contains only the 2 listed pieces for rear brake master-cylinder mounts.

How do I identify the included positions?

Use the original BMW references and diagram item numbers in the contents table, then match them to the orange callouts on the location diagram.