Premium 304 stainless steel replacement hardware for the BMW F700GS (2011-2016). The fairing/bodywork kit covers 2011-2016; the other current bolt sets are listed for 2013-2015. Browse engine, braking/control, handlebar, front-end/chassis, and fairing/bodywork hardware below.
304 Stainless Steel Fasteners for BMW F700GS
Biker Bling supplies 304 stainless steel replacement bolts and model-specific fastener sets for the BMW F700GS (2011-2016). The range below is organised by the fixing areas covered in the individual products.
Year coverage: The fairing/bodywork kit covers 2011-2016. The other bolt sets currently assigned to this category are listed for 2013-2015, so check the individual product before ordering for a 2011, 2012 or 2016 motorcycle.
Engine
- Engine Casing & Covers: Replacement bolts for the engine casing positions shown in the product diagram. The source listing specifies Allen-key fittings rather than Torx, includes Biker Bling anti-seize compound, and states that the bolt sizes, lengths and quantities match the original fasteners.
Braking & Controls
- Control-Unit Clamps: Replacement clamp bolts for the clutch, brake, switch, and throttle units specified in the product listing.
Handlebars, Front End & Chassis
- Handlebar Mounting: Replacement bolts securing the handlebar clamps to the top yoke.
- Bar Ends: Replacement handlebar end bolts.
- Top & Bottom Yokes: Replacement pinch bolts for the top and bottom yokes/bridge clamps.
- Front Wheel & Forks: Replacement front-fork and wheel-spindle/axle pinch bolts.
- Chain Adjustment: Replacement chain tensioner/adjuster bolts, with nuts where specified in the product listing.
- Grab Rail & Carrier: Replacement mounting bolts for the rear passenger grab rail and/or luggage carrier specified in the listing.
Fairings & Bodywork
- Fairing & Bodywork Kit: Replacement stainless steel bodywork fasteners covering windscreen, nose cone/infill panels, tank fairing, front fairings, rear fairings, and front mudguard. The kit includes nylon washers, rubber well nuts, and fairing clips as listed. Check the product page for the exact quantities and positions supplied.
Choose the set for your exact motorcycle year, variant and fixing point. Check the individual product listing for the exact bolt dimensions, quantities, OEM references and included hardware before ordering.
Fitting Tips for BMW F700GS Stainless Steel Fasteners
When fitting 304 stainless steel fasteners into aluminium components on your BMW, a suitable anti-seize compound can help reduce thread galling and corrosion between dissimilar metals. Check the BMW workshop manual first and use anti-seize only where it is appropriate for the specified fastener and installation.
Important Torque Warning: Lubricants and anti-seize compounds reduce friction and can change the relationship between tightening torque and the clamping force produced by a fastener. A torque specified for a dry fastener may not be appropriate for lubricated threads. Follow the BMW workshop manual and the fastener and anti-seize instructions; do not apply an assumed percentage reduction.
Before fitting your new bolts: Read our guide to fitting stainless steel motorcycle bolts and torque settings for more information about anti-seize, thread galling, dissimilar metals and correct installation.
Browse the products above to find 304 stainless steel replacement bolts and fastener sets for your BMW F700GS (2011-2016). Check each listing for the hardware and accessories supplied.