Premium 304 stainless steel bolts and model-specific fastener kits for the Honda VFR750F (1989-1993). Browse engine/fuel-system, braking/control, and front-end/chassis replacement hardware below.
304 Stainless Steel Fasteners for Honda VFR750F
Biker Bling supplies 304 stainless steel replacement bolts and model-specific fastener sets for the Honda VFR750F (1989-1993). The range below is organised by the fixing areas covered in the current product listings.
Year coverage: Some current products have narrower or split year coverage within this category: engine-casing kit: 1989-1983. Check the individual product for your exact model year before ordering.
Engine & Fuel System
- Engine Casing & Covers: Replacement bolts for the engine casing/cover positions shown in the product diagram. The source listings state that the supplied bolts match the original sizes, lengths and quantities; Biker Bling anti-seize compound is included where specified. This current product is listed for 1989-1983; check fitment for other years in this category.
- Carburettors: Replacement bolts for the carburettor top and float-bowl positions specified in the product listing.
Braking & Controls
- Banjo Bolts & Washers: Current listings include individual banjo bolts with copper washers, full banjo-bolt kits, and separate copper-washer sets.
- Front Brake & Clutch Reservoirs: Replacement bolts securing the front brake and clutch reservoir caps/lids.
- Brake, Clutch & Switch Units: Replacement clamp bolts for the clutch, brake, and switch units specified in the listings.
Front End & Chassis
- Top & Bottom Yokes: Replacement pinch bolts for the top and bottom yoke/bridge clamps.
- Front Wheel & Forks: Replacement front-fork and wheel-spindle/axle pinch bolts.
- Footrests & Hangers: Replacement front and rear footrest/hanger mounting bolts.
Choose the set for your exact motorcycle year, variant and fixing point. Check the individual product listing for the exact bolt dimensions, quantities, OEM references and included hardware before ordering.
Fitting Tips for Honda VFR750F Stainless Steel Fasteners
When fitting 304 stainless steel fasteners into aluminium components on your Honda, a suitable anti-seize compound can help reduce thread galling and corrosion between dissimilar metals. Check the Honda workshop manual first and use anti-seize only where it is appropriate for the specified fastener and installation.
Important Torque Warning: Lubricants and anti-seize compounds reduce friction and can change the relationship between tightening torque and the clamping force produced by a fastener. A torque specified for a dry fastener may not be appropriate for lubricated threads. Follow the Honda workshop manual and the fastener and anti-seize instructions; do not apply an assumed percentage reduction.
Before fitting your new bolts: Read our guide to fitting stainless steel motorcycle bolts and torque settings for more information about anti-seize, thread galling, dissimilar metals and correct installation.
Browse the products above to find 304 stainless steel replacement bolts and fastener sets for your Honda VFR750F (1989-1993). Check each listing for the hardware and accessories supplied.