Premium 304 stainless steel bolts and model-specific fastener kits for the Honda CBF600S (2004-2011). Browse engine and fuel-system, brake and control, handlebar, front-end, and footrest and chassis replacement hardware below.
304 Stainless Steel Fasteners for Honda CBF600S
Biker Bling supplies 304 stainless steel replacement bolts and model-specific fastener sets for the Honda CBF600S (2004-2011). The range below is organised by the fixing areas covered in the current product listings.
Engine-product year split: The current carburettor and engine-casing listings are split by year: the carburettor kit is titled 2004-2007, while engine-casing sets are listed separately for 2004-2007 and 2008-2011.
Engine & Fuel System
- Engine Casing & Covers: Replacement engine-casing and cover bolts for the positions shown in the product diagram. Check the individual listing for the exact casing positions and year coverage.
- Carburettors: Replacement bolts for the carburettor tops and float bowls listed for this model. Check the individual product page for exact fitment and year coverage.
Braking & Controls
- Banjo Bolts & Washers: Current listings include individual banjo bolts with washers, complete banjo-bolt and washer kits, and separate copper-washer sets. Check the exact brake-line position, quantity and year coverage on the product page.
- Front Brake Reservoir: Replacement bolts securing the front brake reservoir cap/lid.
- Control-Unit Clamps: Replacement clamp bolts for the brake, clutch and switch-unit clamps specified in the current product listing.
Handlebars, Front End & Chassis
- Handlebar Mounting: Replacement handlebar clamp-to-top-yoke mounting bolts.
- Top & Bottom Yokes: Replacement pinch bolts for the top and bottom yokes/bridge clamps.
- Front Wheel & Forks: Replacement front-fork and wheel-spindle/axle pinch bolts.
- Footrests & Hangers: Replacement front and rear footrest/hanger/rear-set mounting bolts.
- Grab Rail: Replacement mounting bolts for the rear passenger grab rail listed in this category.
Choose the set for your exact motorcycle year, variant and fixing point. Check the individual product listing for the exact bolt dimensions, quantities, OEM references and included hardware before ordering.
Fitting Tips for Honda CBF600S Stainless Steel Fasteners
When fitting 304 stainless steel fasteners into aluminium components on your Honda, a suitable anti-seize compound can help reduce thread galling and corrosion between dissimilar metals. Check the Honda workshop manual first and use anti-seize only where it is appropriate for the specified fastener and installation.
Important Torque Warning: Lubricants and anti-seize compounds reduce friction and can change the relationship between tightening torque and the clamping force produced by a fastener. A torque specified for a dry fastener may not be appropriate for lubricated threads. Follow the Honda workshop manual and the fastener and anti-seize instructions; do not apply an assumed percentage reduction.
Before fitting your new bolts: Read our guide to fitting stainless steel motorcycle bolts and torque settings for more information about anti-seize, thread galling, dissimilar metals and correct installation.
Browse the products above to find 304 stainless steel replacement bolts and fastener sets for your Honda CBF600S (2004-2011). Check each listing for the hardware and accessories supplied.