Premium 304 stainless steel bolts and model-specific fastener kits for the Honda CB500X (2013-2015). Browse engine, brake, handlebar, footrest, front-end and fairing replacement hardware below.
304 Stainless Steel Fasteners for Honda CB500X
The 2013-2015 Honda CB500X range includes model-specific replacement fasteners for the engine, braking system, handlebars, controls, footrests, front end and bodywork. Biker Bling supplies individual replacement bolts and larger 304 stainless steel bolt kits for maintaining and refreshing these areas of the motorcycle.
Engine
- Engine Casing & Covers: Replacement bolts for the engine casings shown in the product diagram. The kit includes Biker Bling anti-seize compound and uses the same bolt sizes, lengths and quantities as the original fasteners.
Braking & Controls
- Banjo Bolts & Washers: Individual stainless steel banjo bolts with two copper washers are available alongside complete brake-line banjo bolt kits.
- ABS & Non-ABS Banjo Kits: Separate kits are available for ABS and non-ABS CB500X models. The non-ABS set includes four banjo bolts and eight copper washers, while the ABS version includes an additional rear ABS connection and ten copper washers.
- Brake Reservoirs: Separate replacement bolt sets are available for the front and rear brake reservoir caps and lids.
- Handlebar Controls: Replacement clamp bolts are available for the front brake, clutch and left and right switch units.
Handlebars & Front End
- Handlebar Mounting: Stainless steel pinch bolts for clamping the handlebars to the top yoke.
- Front Wheel & Forks: Replacement front fork and wheel spindle pinch bolts.
- Top & Bottom Yokes: Stainless steel pinch bolt sets for both the top and bottom yokes or bridges.
Footrests & Rear Chassis
- Footrests & Hangers: Replacement bolts securing the front and rear footrest brackets to the motorcycle frame.
- Passenger Grab Rail: Stainless steel replacement bolts for the rear passenger grab rail.
Fairings & Bodywork
- Fairing & Panel Fastener Kit: Large-headed stainless steel bolts and washers for the windscreen, front and rear fairings and cowlings, belly pan or engine guard, front mudguard and rear chain guard. Stainless steel and nylon washers are included.
Many of the individual CB500X replacement bolt sets use the same sizes, lengths and quantities as the original fasteners. The fairing kit is different and is specifically described as not being a like-for-like OEM replacement, so check the individual product details before ordering.
Fitting Tips for Honda CB500X Stainless Steel Fasteners
When fitting 304 stainless steel fasteners into aluminium components on your Honda, applying a small amount of suitable anti-seize compound to clean threads can help reduce the risk of thread galling and corrosion between dissimilar metals.
Important Torque Warning: Lubricants and anti-seize compounds reduce friction between the threads and can change the relationship between tightening torque and the clamping force produced by the fastener. A torque value specified for a dry fastener may therefore not be appropriate when the threads have been lubricated. Always check the Honda workshop manual and the instructions supplied with the anti-seize product before tightening lubricated fasteners.
Before fitting your new bolts: Read our guide to fitting stainless steel motorcycle bolts and torque settings for more information about anti-seize, thread galling, dissimilar metals and tightening stainless steel fasteners correctly.
Browse the products above to find individual 304 stainless steel bolts, bolt sets and replacement hardware for your Honda CB500X (2013-2015).