Premium 304 stainless steel bolts and model-specific fastener kits for the Honda CB1300S (2010-2015). Browse engine/fuel-system, braking/control, and front-end/chassis replacement hardware below.
304 Stainless Steel Fasteners for Honda CB1300S
Biker Bling supplies 304 stainless steel replacement bolts and model-specific fastener sets for the Honda CB1300S (2010-2015). The range below is organised by the fixing areas covered in the current product listings.
Engine & Fuel System
- Engine Casing & Covers: Replacement bolts for the engine casing/cover positions shown in the product diagram. The source listings state that the supplied bolts match the original sizes, lengths and quantities; Biker Bling anti-seize compound is included where specified.
Braking & Controls
- Banjo Bolts & Washers: Current listings include individual banjo bolts with copper washers, full banjo-bolt kits, and separate copper-washer sets.
- Front Brake Calipers: Replacement pinch bolts that secure the two parts of the front calipers together and the dust plates. These are not the bolts that mount the calipers to the fork legs.
- Front Brake & Clutch Reservoirs: Replacement bolts securing the front brake and clutch reservoir caps/lids.
- Brake, Clutch & Switch Units: Replacement clamp bolts for the clutch, brake, and switch units specified in the listings.
Front End & Chassis
- Handlebar Mounting: Replacement bolts securing the handlebar clamps to the top yoke or fork/stanchion positions specified in the listing.
- Top & Bottom Yokes: Replacement pinch bolts for the top and bottom yoke/bridge clamps.
- Front Wheel & Forks: Replacement front-fork and wheel-spindle/axle pinch bolts.
- Footrests & Hangers: Replacement front and rear footrest/hanger mounting bolts.
- Chain Adjustment: Replacement chain tensioner/adjuster bolts, with nuts where specified in the listing.
Choose the set for your exact motorcycle year, variant and fixing point. Check the individual product listing for the exact bolt dimensions, quantities, OEM references and included hardware before ordering.
Fitting Tips for Honda CB1300S Stainless Steel Fasteners
When fitting 304 stainless steel fasteners into aluminium components on your Honda, a suitable anti-seize compound can help reduce thread galling and corrosion between dissimilar metals. Check the Honda workshop manual first and use anti-seize only where it is appropriate for the specified fastener and installation.
Important Torque Warning: Lubricants and anti-seize compounds reduce friction and can change the relationship between tightening torque and the clamping force produced by a fastener. A torque specified for a dry fastener may not be appropriate for lubricated threads. Follow the Honda workshop manual and the fastener and anti-seize instructions; do not apply an assumed percentage reduction.
Before fitting your new bolts: Read our guide to fitting stainless steel motorcycle bolts and torque settings for more information about anti-seize, thread galling, dissimilar metals and correct installation.
Browse the products above to find 304 stainless steel replacement bolts and fastener sets for your Honda CB1300S (2010-2015). Check each listing for the hardware and accessories supplied.