Premium 304 stainless steel bolts and model-specific fastener kits for the BMW R1200GSW K50 (2013-2015). Browse braking/control, handlebar, front-end/chassis, and fairing/bodywork replacement hardware below.
304 Stainless Steel Fasteners for BMW R1200GSW K50
Biker Bling supplies 304 stainless steel replacement bolts and model-specific fastener sets for the BMW R1200GSW K50 (2013-2015). The range below is organised by the fixing areas covered in the individual products.
Braking & Controls
- Brake & Clutch Reservoirs: Replacement reservoir cap/lid bolts for the front brake and clutch units.
- Control-Unit Clamps: Replacement clamp bolts for the clutch and brake units specified in the product listing.
Handlebars, Front End & Chassis
- Handlebar Mounting: Replacement bolts securing the handlebar clamps to the top yoke.
- Bar Ends: Replacement handlebar end bolts.
- Bottom Yoke: Replacement bottom-yoke/bridge pinch bolts.
- Front Wheel & Forks: Replacement front-fork and wheel-spindle/axle pinch bolts.
- Fuel Filler Cap: Replacement petrol/fuel-filler-cap bolts.
- Grab Rail & Carrier: Replacement mounting bolts for the rear passenger grab rail and/or luggage carrier specified in the listing.
Fairings & Bodywork
- Fairing & Bodywork Kit: Replacement stainless steel bodywork fasteners covering screen, tank, cockpit trim fairings (by clocks), air intakes, radiator fairings, side left and right fairings, upper front mudguard, lower front mudguard, and rear mudguard. The kit includes bolts and washers as listed. The listing specifies Allen-key fittings rather than Torx. Biker Bling anti-seize compound is included. The listing states that the bolt sizes, lengths and quantities match the original fasteners.
Choose the set for your exact motorcycle year, variant and fixing point. Check the individual product listing for the exact bolt dimensions, quantities, OEM references and included hardware before ordering.
Fitting Tips for BMW R1200GSW K50 Stainless Steel Fasteners
When fitting 304 stainless steel fasteners into aluminium components on your BMW, a suitable anti-seize compound can help reduce thread galling and corrosion between dissimilar metals. Check the BMW workshop manual first and use anti-seize only where it is appropriate for the specified fastener and installation.
Important Torque Warning: Lubricants and anti-seize compounds reduce friction and can change the relationship between tightening torque and the clamping force produced by a fastener. A torque specified for a dry fastener may not be appropriate for lubricated threads. Follow the BMW workshop manual and the fastener and anti-seize instructions; do not apply an assumed percentage reduction.
Before fitting your new bolts: Read our guide to fitting stainless steel motorcycle bolts and torque settings for more information about anti-seize, thread galling, dissimilar metals and correct installation.
Browse the products above to find 304 stainless steel replacement bolts and fastener sets for your BMW R1200GSW K50 (2013-2015). Check each listing for the hardware and accessories supplied.