Premium 304 stainless steel bolts and model-specific fastener kits for the Honda CB600S Hornet (2000-2003). Browse engine, carburettor, brake, handlebar, front-end and chassis replacement hardware below.
304 Stainless Steel Fasteners for Honda CB600S Hornet
Biker Bling supplies 304 stainless steel replacement bolts and fastener sets for the Honda CB600S Hornet (2000-2003). The range below is organised by the fixing areas covered in the individual products, so you can choose hardware for the job you are carrying out.
Engine
- Carburettors: Replacement carburettor bolt kits; check the listing for the carburettor sections covered.
- Engine Casing & Covers: Replacement bolt sets for the external engine casings and covers shown in the individual product listing. Anti-seize compound is listed with the engine kit.
Braking & Controls
- Banjo Bolts & Washers: Individual stainless steel banjo bolts with washers, full banjo bolt and washer kits and separate copper washer sets. Check the thread, brake layout and ABS/non-ABS fitment where specified.
- Control-Unit Clamps: Replacement clamp bolts for the brake, clutch and switch units specified in the individual set.
- Front Brake Reservoir: Replacement bolts securing the front brake reservoir cap.
Handlebars, Front End & Chassis
- Front Wheel & Forks: Replacement front fork and wheel spindle/axle pinch bolts.
- Top Yoke: Replacement top yoke/bridge pinch bolts.
- Handlebar Mounting: Replacement handlebar/riser-to-top-yoke clamp bolts.
- Footrests & Hangers: Replacement front and rear footrest/hanger mounting bolts and rear-set fixings. Check each set for the positions included.
- Grab Rail & Carrier: Replacement rear passenger grab-rail or luggage-carrier mounting bolts, as specified in the listing.
Choose the set for your exact motorcycle year, variant and fixing point. Check bolt dimensions, quantities and any OEM references in the individual listing; items grouped in this category are not interchangeable across every year or application.
Fitting Tips for Honda CB600S Hornet Stainless Steel Fasteners
When fitting 304 stainless steel fasteners into aluminium components on your Honda, a suitable anti-seize compound can help reduce thread galling and corrosion between dissimilar metals. Check the workshop manual first: use anti-seize only where it is appropriate for the specified fastener and installation.
Important Torque Warning: Lubricants and anti-seize compounds reduce friction and can change the relationship between tightening torque and the clamping force produced by a fastener. A torque specified for a dry fastener may not be appropriate for lubricated threads. Follow the Honda workshop manual and the fastener and anti-seize instructions; do not apply an assumed percentage reduction.
Before fitting your new bolts: Read our guide to fitting stainless steel motorcycle bolts and torque settings for more information about anti-seize, thread galling, dissimilar metals and correct installation.
Browse the products above to find 304 stainless steel replacement bolts and fastener sets for your Honda CB600S Hornet (2000-2003). Check each listing for the hardware and accessories supplied.