Premium 304 stainless steel bolts and model-specific fastener kits for the BMW S1000RR K46 (2014-2015). Browse engine, braking/control, handlebar, front-end/chassis, and fairing/bodywork replacement hardware below.
304 Stainless Steel Fasteners for BMW S1000RR K46
Biker Bling supplies 304 stainless steel replacement bolts and model-specific fastener sets for the BMW S1000RR K46 (2014-2015). The range below is organised by the fixing areas covered in the individual products.
Engine
- Engine Casing & Covers: Replacement bolts for the engine casing positions shown in the product diagram. The source listing specifies Allen-key fittings rather than Torx, includes Biker Bling anti-seize compound, and states that the bolt sizes, lengths and quantities match the original fasteners.
Braking & Controls
- Control-Unit Clamps: Replacement clamp bolts for the clutch and brake units specified in the product listing.
Handlebars, Front End & Chassis
- Handlebar Mounting: Replacement bolts securing the handlebar clamps to the top yoke.
- Top & Bottom Yokes: Replacement pinch bolts for the top and bottom yokes/bridge clamps.
- Front Wheel & Forks: Replacement front-fork and wheel-spindle/axle pinch bolts.
- Footrests & Hangers: Replacement mounting bolts for the front and rear footrest/hanger positions specified in the listing.
- Fuel Filler Cap: Replacement petrol/fuel-filler-cap bolts.
- Chain Adjustment: Replacement chain tensioner/adjuster bolts; check the listing for any included nuts or additional hardware.
Fairings & Bodywork
- Fairing & Bodywork Kit: Replacement stainless steel bodywork fasteners covering screen, mirrors, tank, front left and right fairings, rear left and right fairings, front mudguard, rear mudguard, and rear chain guard. The kit includes bolts and washers as listed. The listing specifies Allen-key fittings rather than Torx. Biker Bling anti-seize compound is included. The listing states that the bolt sizes, lengths and quantities match the original fasteners.
Choose the set for your exact motorcycle year, variant and fixing point. Check the individual product listing for the exact bolt dimensions, quantities, OEM references and included hardware before ordering.
Fitting Tips for BMW S1000RR K46 Stainless Steel Fasteners
When fitting 304 stainless steel fasteners into aluminium components on your BMW, a suitable anti-seize compound can help reduce thread galling and corrosion between dissimilar metals. Check the BMW workshop manual first and use anti-seize only where it is appropriate for the specified fastener and installation.
Important Torque Warning: Lubricants and anti-seize compounds reduce friction and can change the relationship between tightening torque and the clamping force produced by a fastener. A torque specified for a dry fastener may not be appropriate for lubricated threads. Follow the BMW workshop manual and the fastener and anti-seize instructions; do not apply an assumed percentage reduction.
Before fitting your new bolts: Read our guide to fitting stainless steel motorcycle bolts and torque settings for more information about anti-seize, thread galling, dissimilar metals and correct installation.
Browse the products above to find 304 stainless steel replacement bolts and fastener sets for your BMW S1000RR K46 (2014-2015). Check each listing for the hardware and accessories supplied.