Brake, Clutch and Switchgear Clamp Bolt Kit for Honda VFR800Fi RC46

This kit renews the fasteners for the original front brake and clutch holders and the left and right handlebar control housings. The right-side switch/throttle housing fixings are included where those functions share a housing. Browse the matching Honda VFR800Fi RC46 1998–2001 fastener range.

What you receive

• 1x Biker Bling anti-seize compound pack (7 g).

• 8x A2 (304) stainless steel control fixing bolts and bolts, allocated below.

These fixings serve different mounting points. Use each only in its intended position; they are not an interchangeable bolt assortment.

Photographs may show generic bolt examples; use the contents list and fitting positions for the supplied kit.

Important fitment notes

• Compatibility: Listed for Honda VFR800Fi RC46 1998–2001 with the control holder and housing positions listed below.
• Verify before installing: Match the exact motorcycle, original components and fitting arrangement. Modified assemblies may need different fasteners.
• Aftermarket parts: These are model-specific aftermarket replacements, not genuine Honda-branded components.
• Exclusions: Controls, levers and housings are not included. Lever pivot bolts, hydraulic banjo bolts, handlebar-to-fork bolts and yoke pinch bolts are outside this kit’s scope.

Original Honda part references

• 96001-06022-07 — original control mounting reference; match the year and position.
• 93892-05020-07 — original control mounting reference; match the year and position.
• 93892-05025-07 — original control mounting reference; match the year and position.
• 93892-05035-07 — original control mounting reference; match the year and position.
• 93892-05045-07 — original control mounting reference; match the year and position.

These references identify original Honda components, not Biker Bling product codes. Year-specific alternatives are not extra kit contents or proof of an official supersession. Match the original part and mounting position before fitting.

Model-specific aftermarket replacements: Biker Bling selects the supplied replacements for the control holder and housing positions listed below. The cross-reference does not establish suitability for unrelated mounting points.

Materials and head style: The supplied fasteners are A2 (304) stainless steel. Their heads may look different from Honda’s originals. Material alone does not establish mechanical-strength equivalence.

When should you replace these fixings?

• Rounded heads or damaged threads: Inspect the fasteners before refitting the controls.
• Corrosion or missing fixings: Check the holders and threaded holes as well as the bolts.
• Control adjustment: Inspect the housings and locating features during servicing.

Replacement fasteners cannot repair cracked housings, damaged holders or stripped threads.

Fitting information

• Follow Honda’s procedure for each separate mounting position, including alignment, clamp orientation, fastener specification and tightening.
• Seat the housings without forcing them together and keep wiring and cables clear. Use fitting compounds only where specified.
• Confirm that the controls are secure and the throttle returns freely. Check brake and clutch operation, switch functions and hose/cable clearance through full steering movement.
• Have insecure controls or damaged mountings checked before riding.

For general background, read our guide to protecting aluminium mounting threads. Honda’s workshop procedure takes precedence.

Customer questions

Are handlebar or yoke clamp bolts included?

No. This kit covers the listed control holders and housings only.

Will the kit suit replacement controls?

Aftermarket master cylinders, switches and lever brackets may require different fasteners. Check their specifications.