Front Spindle Pinch Bolts for the SC44 Fireblade
This four-bolt kit renews the fixings that clamp the front wheel spindle at the bottom of the fork legs on the Honda CBR929RR / CBR900RR SC44 2000–2001. There are two bolts on each side. These are axle-clamping bolts, rather than fork-yoke or calliper mounting bolts.
What you receive
- 4x A2 (304) stainless steel spindle pinch bolts – two for each original fork-leg axle clamp.
- 1x Biker Bling anti-seize compound pack (7 g).
The pack contains the replacement bolts only. Keep them with their intended axle-clamp positions when servicing the front wheel.
The photographs illustrate the supplied fixing style; use the contents list for this kit’s quantities. Controls and other components shown are not supplied.
Original Honda fixing references
| Fitting position / component | Supplied quantity | Original Honda fixing reference |
|---|---|---|
| Front lower-fork axle holder clamps | 4x | 90108-MR7-000 |
These numbers identify the original Honda fixing positions, not Biker Bling product codes. The supplied kit contains aftermarket replacements, not genuine Honda parts. Year-specific references describe alternatives for their stated years, not additional supplied parts.
Model-specific OEM replacements: This four-bolt kit is selected for the SC44 front axle clamps, with two bolts for each fork leg. The bolts’ critical fitting dimensions match Honda’s original fixings for these positions. They are aftermarket replacements, not genuine Honda hardware.
Head style and materials: The bolts are made from A2 (304) stainless steel. Their heads may differ in appearance from Honda’s originals.
When should you replace these fixings?
- Rounded or corroded heads: Damaged drive recesses can make wheel removal difficult.
- Missing bolts or damaged threads: The clamp needs its complete correct kit. Inspect damaged fork-leg threads before fitting replacements.
- During wheel or fork servicing: Check the bolts and clamp faces while the wheel is removed.
Fitting advice
Important: These fixings secure the front axle. Follow Honda’s workshop instructions for wheel alignment, fastener specification, tightening order and torque. Our motorcycle bolt strength guide explains why material alone is not a strength specification. After assembly, check wheel rotation, brake operation and that every axle clamp is secure before riding. Have a qualified motorcycle technician inspect any damaged clamp or uncertain installation.
Customer questions
Is the front spindle included?
No. These are the axle holder pinch bolts; the spindle, wheel and fork assemblies are not supplied.
Where should I use the anti-seize compound?
Use it only where the relevant motorcycle or component instructions specify a suitable thread treatment. Inclusion of the pack is not an instruction to lubricate every fixing.





















Reviews
There are no reviews yet.