Front axle holder pinch bolt for Honda NM4 Vultus 2014–2015

This replacement bolt is for the original fork-end axle holder clamping position. It is separate from the axle retaining bolt, internal fork bolts and brake calliper mounts. Browse the matching Honda NM4 Vultus 2014–2015 fastener range.

What you receive

• 1x stainless steel replacement bolts for original front axle holder pinch position.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Honda fixing references

The original fork diagram shows one axle-holder pinch bolt. The fork-bottom damper-retaining bolt is a different fixing and is not part of this kit. Axle, wheel and fork components are excluded.

These references identify Honda’s original fixing positions, not Biker Bling product codes. The supplied items are aftermarket replacements, not genuine Honda parts.

Important fitment notes

• For the matching original components on Honda NM4 Vultus 2014–2015. Check the exact model and existing fitting before installation.
• Aftermarket or modified assemblies may need different hardware.
• Product photos can be generic bolt illustrations. Use the itemised contents and fixing positions for the supplied allocation.

Materials and head style: The replacement bolts are stainless steel. Head appearance may differ from the original Honda fasteners. The material name alone does not establish mechanical-strength equivalence.

When should you replace these fixings?

• Inspect damaged drive recesses, corroded hardware and worn threads during servicing.
• Check the component, mounting faces and threads if a fixing is loose or will not tighten correctly.
• Replacement bolts cannot repair a cracked component, stripped thread or damaged mounting.

Fitting information

Support the motorcycle securely and follow Honda’s axle seating, wheel alignment, thread condition, tightening order and torque procedure. Confirm a secure axle assembly, normal wheel movement and correct brake operation before riding.

The separate anti-seize pack is included with the kit. Use fitting compounds only where the applicable motorcycle or component instructions specify them. It is not an instruction to lubricate hydraulic sealing faces or every threaded fixing. Have uncertain work carried out or checked by a qualified motorcycle technician.

For general background, read our motorcycle bolt strength grades guide. Honda’s exact service procedure takes precedence.

Customer questions

Is the front spindle included?

No. These are the axle holder pinch bolts; the spindle, wheel and fork assemblies are not supplied.

Where should I use the anti-seize compound?

Use it only where the relevant motorcycle or component instructions specify a suitable thread treatment. Inclusion of the pack is not an instruction to lubricate every fixing.