Model-specific fairing bolt kit for Honda CB500F

This model-specific kit includes shouldered and non-shouldered stainless steel fairing bolts selected to replace the original Honda fixings at their intended mounting positions on the Honda CB500F 2013–2015. Nylon washers are supplied for the non-shouldered bolts. It covers the listed headlight fairing, clock panel, front side fairings, rear panels, belly pan, front mudguard and chain guard.

What you receive

• 29x stainless steel bolts: 21x shouldered and 8x non-shouldered.
• 11x self-tapping screws.
• 10x plastic push clips.
• 2x rubber well nuts.
• 8x nylon washers for the non-shouldered bolts.
• 1x Biker Bling anti-seize compound pack (7 g).

The hardware is bagged and labelled by fitting location.

Headlight fairing

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Headlight fairing	3x	Self-tapping screw	93903-24380

Clock panel

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Clock panel	4x	Plastic push clip	90116-MCS-G00
Clock panel	2x	Plastic push clip	90116-SP0-003

Front side fairings

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Front side fairings	6x	Shouldered bolt	90115-MGZ-J00
Front side fairings	2x	Shouldered bolt	90116-MFL-D20
Front side fairings	2x	Shouldered bolt	90133-KPP-T00
Front side fairings	8x	Self-tapping screw	93903-24380

Rear fairings and panels

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Rear fairings and panels	2x	Non-shouldered bolt	90130-KYJ-900
Rear fairings and panels	2x	Plastic push clip	90116-MCS-G00
Rear fairings and panels	2x	Rubber well nut	90114-KAS-900
Rear fairings and panels	6x	Shouldered bolt	90133-KPP-T00
Rear fairings and panels	2x	Plastic push clip	90683-GR1-003

Belly pan

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Belly pan	3x	Shouldered bolt	90133-KPP-T00

Front mudguard

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Front mudguard	2x	Non-shouldered bolt	90130-KYJ-900
Front mudguard	2x	Non-shouldered bolt	90130-MGZ-J00
Front mudguard	2x	Non-shouldered bolt	90131-MGZ-J00

Chain guard

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Chain guard	2x	Shouldered bolt	90115-MGZ-J00

Honda references identify the original components replaced at the listed positions. These are aftermarket replacements, not genuine Honda-branded parts. Repeated references in separate areas describe separate supplied quantities. The rear-fairing group includes the middle side-cover fixings.

Why choose a model-specific CB500F fairing bolt kit?

When comparing motorcycle fairing bolt kits, check shoulder profiles, head styles, fitting locations and the supplied hardware as well as thread size. This CB500F bodywork bolt kit identifies the shouldered and non-shouldered motorcycle fairing fasteners by mounting area and Honda reference. Nylon washers accompany the non-shouldered bolts, while replacement motorcycle clips and well nuts are included at the positions listed above. Read our guide to generic and model-specific motorcycle bolt kits.

Important fitment notes

• For Honda CB500F model years 2013, 2014 and 2015 with the original bodywork and mounting arrangement.
• Check aftermarket panels and modified mounting points against the intended fixings before installation.
• Body panels, the mudguard and chain guard themselves are not supplied. Rear grab-rail mounting bolts are not included.
• The stainless steel description applies to the replacement bolts. Plastic clips, rubber well nuts and nylon washers are made from their respective materials.
• Photographs may illustrate the fastener style; use the contents tables for the supplied quantities.

Fitting the fairing bolts

Match each bag to its labelled fitting area. Check that panels and mounting points are aligned and undamaged, start bolts by hand and avoid overtightening plastic bodywork. Fit nylon washers with the non-shouldered bolts. Follow Honda’s tightening and thread-treatment instructions; use anti-seize only where appropriate. Read our motorcycle fairing bolt fitting guide for general guidance.

Customer questions

Does this kit include shouldered fairing bolts?

Yes. It supplies 21x shouldered and 8x non-shouldered stainless steel bolts, allocated to the fitting areas shown in the tables.

Are clips and rubber well nuts included?

Yes. There are 10x plastic push clips and 2x rubber well nuts for the listed original mounting positions.

Is matching the thread size enough when choosing bodywork bolts?

Check the shoulder profile, head style and fitting location too. A matching thread alone does not establish suitability for a particular panel mounting.

Are rear grab-rail bolts included?

No. The grab-rail mountings are separate from this fairing bolt kit.