Windscreen Bolt Kit with Well Nuts for the SC44 Fireblade
This model-specific kit renews the six windscreen mounting positions on the Honda CBR929RR / CBR900RR SC44 2000–2001. The bolts secure the screen to the nose fairing through rubber well nuts; stainless steel and nylon washers complete the supplied fitting arrangement.
What you receive
- 6x A2 (304) stainless steel large-pan-head windscreen bolts.
- 6x rubber well nuts for the original screen mounting positions.
- 6x stainless steel washers.
- 6x nylon washers.
- 1x Biker Bling anti-seize compound pack (7 g).
The screen and nose fairing are not included. The stainless steel and nylon washers form the supplied aftermarket arrangement; the kit is not a claim that every component duplicates Honda’s original washer style.
Original Honda fixing references
| Fitting position / component | Supplied quantity | Original Honda fixing reference |
|---|---|---|
| Windscreen-to-upper-cowl bolts | 6x | 90109-SB6-000 |
| Rubber well nuts | 6x | 90111-KW3-003 |
| Stainless steel supporting washers | 6x | 90504-964-000 |
| Nylon protective washers | 6x | Supplied aftermarket washer; no separate Honda reference claimed |
These numbers identify the original Honda fixing positions, not Biker Bling product codes. The supplied kit contains aftermarket replacements, not genuine Honda parts. Year-specific references describe alternatives for their stated years, not additional supplied parts.
The kit includes the listed stainless steel and nylon washers as its aftermarket supporting arrangement. Original Honda screen-washer references describe the original components, not a claim that these washers have the same material or shape.
Model-specific OEM replacements: The six screen bolts have critical fitting dimensions matched to Honda’s original fixings for these mounting positions. The supplied well nuts and washers are selected for the SC44 screen arrangement. This is an aftermarket replacement kit, not genuine Honda hardware or a generic assortment.
When should you replace these fixings?
- Rounded or corroded heads: Renew tired screen hardware during removal or replacement.
- Hardened or damaged well nuts: Worn rubber fittings may no longer hold the screen properly.
- Missing washers: Check that the screen has the complete correct fitting arrangement before securing it.
Fitting advice
Support the screen, align the mounting holes and seat the well nuts before tightening. Keep the protective washers between the bolt hardware and screen as intended. Follow Honda’s fitting instructions and avoid crushing the rubber or stressing the screen. Our fairing bolt fitting guide explains careful panel fitting. Use the supplied anti-seize only where the specified installation permits it; lubricant changes tightening behaviour. Inspect any cracked screen or fairing hole rather than trying to cure it by tightening harder.
Customer questions
Is this a complete fairing kit?
No. It covers the listed windscreen fixing positions only. The screen and body panels are not supplied.
Where should I use the anti-seize compound?
Use it only where the relevant motorcycle or component instructions specify a suitable thread treatment. Inclusion of the pack is not an instruction to lubricate every fixing.





















Reviews
There are no reviews yet.