Windscreen Bolt Kit with Rubber Well Nuts for Honda CBR1000RR

Renew the windscreen fixings with A2 (304) stainless steel bolts, supporting washers and rubber well nuts selected for the original screen mounting positions. The large pan heads measure 12 mm across; this is the head diameter, not the thread size. Browse the matching Honda CBR1000RR 2008–2016 fastener range.

What you receive

• 4x large pan-head A2 (304) stainless steel windscreen bolts.
• 4x A2 (304) stainless steel washers.
• 4x rubber well nuts.
• 4x nylon supporting washers.
• 1x Biker Bling anti-seize compound pack (7 g).

Photographs illustrate the hardware and may be generic. Use the contents list and fitting positions for the supplied kit.

Important fitment notes

• Compatibility: Listed for Honda CBR1000RR 2008–2016 with the original screen-to-nose-cone fixing positions.
• Verify before ordering or fitting: Match the exact year, variant, original components and fixing arrangement. Modified assemblies may require different hardware.
• Variant check: Match the exact standard, ABS or SP variant and original components. This year range does not establish compatibility with every alternative fork, brake-hose or mounting arrangement.
• Aftermarket parts: These are Biker Bling replacement components, not genuine Honda-branded parts.
• Exclusions: Windscreens, nose-cone fairings and other bodywork fasteners are not included. This is not a complete fairing bolt kit. Original plastic screen clips are not supplied.

Original Honda part references

• 90118-MBB-000 / 90119-MFL-D20 — original screen fixing bolt.
• 90111-KW3-003 — original cowl-setting well nut.
• 90504-964-000 — original supporting screen washer.

These numbers identify original Honda components, not Biker Bling SKUs. Year-specific references are alternatives for their stated positions, not extra supplied parts or proof of an official supersession.

Materials and head style: The large pan-head bolts and steel washers are A2 (304) stainless steel; the well nuts are rubber and the protective washers are nylon. The bolt heads measure 12 mm in diameter. This is head diameter, not thread size; the supplied appearance differs from original Honda hardware.

When should you replace these fixings?

• Worn well nuts: Inspect cracked, hardened or loose rubber fittings.
• Damaged bolts: Check worn heads and threads.
• Missing washers: Check the screen holes and supporting fittings.

New fixings cannot repair cracked mounting holes or damaged fairing supports.

Fitting information

• Align the screen and original mounting points before fitting.
• Seat rubber well nuts and supporting washers in their intended positions. Avoid overtightening or stressing the plastic.
• Follow the motorcycle and component fitting instructions. Use anti-seize only where appropriate; keep compounds off the screen and rubber fittings.
• Check the screen is secure without distortion or movement before use.

For general background, read our guide to fitting motorcycle fairing bolts without damaging plastic panels. Honda’s workshop procedure takes precedence.

Customer questions

Is this a complete fairing bolt kit?

No. It covers the windscreen fixing positions only.

Do the bolt heads match Honda’s originals?

The supplied large pan heads may look different. See the photographs for the hardware style and use the listed fitting scope.