Water Radiator and Oil Cooler Mounting Bolt Kit for Daytona T595

5x stainless steel replacement mounting bolts: 2x for the water radiator and 3x for the oil cooler. These are cooler mounting fixings, not coolant drain or oil-line connection bolts. Designed for the Triumph Daytona T595 1996–1999.

What you receive

• 5x stainless steel bolts for the positions listed below.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Important fitment notes

• For Triumph Daytona T595 1996–1999 with the original water radiator and oil cooler mountings shown in the listing drawings.
• Check the exact motorcycle and original components before fitting. Modified or aftermarket assemblies may require different hardware.
• Radiators, oil cooler, brackets, rubbers, sleeves, hoses, coolant drain bolts, oil-line unions and seals are not included.
• The contents tables define the supplied hardware. Photographs illustrate the hardware style and fitting positions and may be generic.

Model-specific aftermarket replacements

Biker Bling selects these replacement components for the listed original fixing positions. The Triumph references identify original components, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.

Materials and appearance: The supplied metal replacement fasteners are stainless steel. Their appearance may differ from the original Triumph hardware. Stainless material alone does not establish equivalent mechanical strength.

When should you replace these fixings?

• Corroded or damaged hardware: Inspect worn heads, damaged threads and supporting parts at the listed fixing positions.
• Missing fixings: Restore the correct mounting arrangement with suitable replacement hardware.
• Component servicing: Check the surrounding mounting points before reassembly.

Replacement hardware cannot repair cracked components, stripped threads or damaged mounting faces. Identify the cause of looseness or leakage before refitting.

Fitting information

Support each cooler and retain sound original brackets, rubbers and sleeves as Triumph specifies. Match the two bolt groups to their listed locations, align mounting faces and start bolts by hand. Follow the prescribed tightening and thread condition and use compounds only where appropriate. Check both coolers are secure and hoses are not strained. If oil or coolant connections are opened, follow the appropriate refilling, bleeding and leak-check procedure.

For general guidance, read our stainless steel motorcycle bolt fitting guide. Triumph’s workshop procedure takes precedence.

Customer questions

Are both cooler mountings covered?

Yes. The kit supplies 2x water radiator mounting bolts and 3x oil cooler mounting bolts, plus one anti-seize compound pack (7 g).

Are fluid-line bolts or seals included?

No. These five bolts retain the coolers. Fluid unions, sealing parts and drain bolts are separate.