Shop bolt and fixing kits for the BMW F650ST Strada E169 (1996–2000), from 304 stainless steel fairing and engine cover bolts to plated spire clips and rubber windscreen well nuts. Choose a full kit or the area you’re working on. Compare your original fittings with the Strada diagrams, especially if your bike was first registered after 2000.

Illustrative motorcycle restoration workshop

Restoring your F650ST Strada E169 1996–2000?

Get all 9 recommended kits for £100.00 — save £46.91 (31.9%) compared with buying separately.

Refresh commonly visible motorcycle fixings that can become rusty or tarnished over time.

Included kits — customise your selection

Choose at least two different kits for multi-kit savings. Kits marked “normal price” stay at their listed price. The first of each eligible smaller kit receives the model discount. Extra copies are normal price.

Recommended bundle kits

These kits are pre-selected to refresh commonly visible fixings that can become rusty or tarnished over time. They’re a practical starting point for tidying up your bike—add or remove kits to suit your needs.

View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity

Other kits you can add

View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity
View kit ↗
Quantity

9 kits · £100.00 — save £46.91

Free UK delivery

One discounted selection per model per order. Different model offers can be combined. Current product prices apply; delivery and any applicable tax are calculated in the basket.

Sale!
Original price was: £29.99.Current price is: £25.99.

Choose a BMW F650ST Strada kit by fitting area

Fairings and bodywork

The 102-piece full fairing kit includes 34 bolts, 34 nylon washers, 30 plated clips and four rubber well nuts. For one repair, choose the windscreen, nose cone and tank trim, side fairing and radiator trim, rear fairing or front mudguard kit. These positions are already covered by the full kit.

If you’re reusing the original bolts, choose the four windscreen well nuts or the 30 fairing spire clips and captive nuts. The rear wheel cover kit covers a separate assembly from the rear side panels.

Engine, cooling and exhaust

The engine casing cover kit contains 32 bolts and three copper sealing washers for the left casing, its attached water pump cover and the right casing. Choose the radiator and expansion tank mounting kit for the cooling system mounts. The outer radiator trim uses the side fairing kit above. Separate kits cover the exhaust shields and mounts and the airbox and filter cover.

Brakes, handlebars and steering

Choose the front brake reservoir lid screws for the two screws in the lid. The rear brake master cylinder mounting bolts secure the cylinder to the bike. The short banjo bolts and copper washers fit the brake hose unions.

For the front end, choose the upper handlebar clamp bolts, bar end weight bolts or top and bottom yoke pinch bolts according to the fixing position.

Chassis and luggage

The rear footrest hanger bolts secure the passenger hanger brackets to the frame. The pannier mount bolt and nut kit supplies the four small bolts and four nuts at carrier items 4 and 5. The chain adjuster bolts and nuts fit the adjusters at the rear wheel.

Fuel filler, indicators and battery

The six-screw petrol cap kit contains two groups of three bolts for the original cap. The front and rear indicator fixing kit covers the signal mounts. The battery tray and hold-down kit covers the tray fixings.

Checking fitment and fitting the kit

Use the F650ST Strada drawing for your assembly, particularly for the front mudguard and tank trim where the Funduro layout differs. Each product table lists the supplied quantities and available BMW references. These identify the original fitting positions for Biker Bling aftermarket hardware.

Biker Bling anti-seize is included with the engine casing and fairing bolt kits. Lubrication changes the clamping force at a given torque. Follow BMW’s workshop instructions for the thread condition and tightening specification at each position. See the stainless steel bolt fitting and torque guide.