Clip-On Handlebar Clamp Bolts for the SC44 Fireblade
This pair replaces the bolts that clamp the original left and right clip-on handlebars around the fork stanchions on the Honda CBR929RR / CBR900RR SC44 2000–2001. Each clip-on has one clamp bolt. These are separate from the upper and lower yoke pinch bolts.
What you receive
- 2x A2 (304) stainless steel clip-on clamp bolts – one left and one right.
- 1x Biker Bling anti-seize compound pack (7 g).
Handlebars and clamp assemblies are not included. Honda uses the same reference elsewhere in the top-bridge diagram; this pack covers only the two clip-on positions.
The photographs illustrate the supplied fixing style; use the contents list for this kit’s quantities. Controls and other components shown are not supplied.
Original Honda fixing references
| Fitting position / component | Supplied quantity | Original Honda fixing reference |
|---|---|---|
| Left and right clip-on handlebar-to-fork clamps | 2x | 96300-08040-07 |
These numbers identify the original Honda fixing positions, not Biker Bling product codes. The supplied kit contains aftermarket replacements, not genuine Honda parts. Year-specific references describe alternatives for their stated years, not additional supplied parts.
Model-specific OEM replacements: The pair is selected for the original left and right SC44 clip-on clamps. Each bolt’s critical fitting dimensions match the corresponding Honda fixing. These are aftermarket replacements, not genuine Honda stock.
Head style and materials: The pair is made from A2 (304) stainless steel. It is selected for the original SC44 clip-ons, rather than universal aftermarket handlebar clamps.
When should you replace these fixings?
- Damaged heads: Rounded drive recesses can make handlebar repositioning difficult.
- Corroded or damaged threads: Inspect hardware that will not engage or seat correctly.
- A loose handlebar: Check the clamp and fork surface together; a new bolt cannot repair a cracked clamp.
Fitting advice
Handlebar security is steering-critical. Position the original clamps correctly and follow Honda’s specified fastener requirements and tightening procedure. Our motorcycle bolt strength guide explains the difference between material and strength grade. Afterwards, turn the steering fully both ways and check throttle return and cable and hose clearance. Have an uncertain or damaged mounting inspected before riding.
Customer questions
Are the top-yoke bolts included?
No. This kit covers the listed handlebar clamp positions. Yoke pinch bolts are separate.
Where should I use the anti-seize compound?
Use it only where the relevant motorcycle or component instructions specify a suitable thread treatment. Inclusion of the pack is not an instruction to lubricate every fixing.





















Reviews
There are no reviews yet.