Footrest Hanger Bolt Kit for Honda VFR800F RC46

These replacement bolts secure the original rider and pillion footrest hanger brackets to the motorcycle frame. They are not footpeg pivot pins or rubber-pad bolts. Browse the matching Honda VFR800F RC46 2002–2013 fastener range.

What you receive

• 1x Biker Bling anti-seize compound pack (7 g).

• 8x A2 (304) stainless steel hanger-to-frame mounting bolts.

Photographs may show generic bolt examples; use the contents list and fitting positions for the supplied kit.

Important fitment notes

• Compatibility: Listed for Honda VFR800F RC46 2002–2013 with the original hanger-to-frame mounts listed below.
• Verify before installing: Match the exact motorcycle, original components and fitting arrangement. Modified assemblies may need different fasteners.
• Aftermarket parts: These are model-specific aftermarket replacements, not genuine Honda-branded components.
• Exclusions: Footrests, hangers, heel plates, footpeg pivots, rubber-pad bolts, rear brake master-cylinder mounting bolts and exhaust hardware are not included.

Original Honda part references

• 90156-MCW-D00 / 90157-MCW-D00 — Front rider hanger mounts original fixing reference.
• 90157-ME9-000 — Rear pillion hanger mounts original fixing reference.

These references identify original Honda components, not Biker Bling product codes. Year-specific alternatives are not extra kit contents or proof of an official supersession. Match the original part and mounting position before fitting.

Model-specific aftermarket replacements: Biker Bling selects the supplied replacements for the original hanger-to-frame mounts listed below. The cross-reference does not establish suitability for unrelated mounting points.

Materials and head style: The supplied bolts are A2 (304) stainless steel. Their heads may differ from the originals; stainless material alone does not establish mechanical-strength equivalence.

When should you replace these fixings?

• Corroded or rounded heads: Inspect bolts during bracket servicing.
• Damaged threads: Check the fastener and frame mounting threads before fitting a replacement.
• Missing hardware: Each hanger needs the correct fixing at every intended mounting point.

New bolts cannot repair a cracked bracket, damaged mounting face or stripped frame thread.

Fitting information

• The brackets support the rider and passenger. Follow Honda’s fastener specification, bracket positioning and tightening procedure.
• Support the bracket during removal and align the mounting faces before starting the correct bolts by hand. Do not pull a misaligned bracket into place with a bolt.
• Use thread treatments only where the relevant instructions specify them.
• Before riding, check the hangers are secure and that the gear lever, brake pedal and nearby components operate without obstruction. Have damaged mountings inspected by a qualified technician.

For general background, read our motorcycle bolt strength grades guide. Honda’s workshop procedure takes precedence.

Customer questions

Are footpeg pivots or rubber-pad bolts included?

No. This pack supplies the listed hanger-to-frame mounting bolts only.

Will these bolts fit aftermarket rearsets?

Check the rearset manufacturer’s mounting requirements. This kit covers the original Honda brackets.