Handlebar Clamp Bolt Kit for Bonneville America

4x stainless steel replacement bolts for the original upper handlebar clamps. These bolts secure the handlebar within its upper holders; they are separate from the lower riser-to-yoke mounting fixings and fork-yoke pinch bolts. Designed for the Triumph Bonneville America 2002–2008 (Carbs).

What you receive

• 4x stainless steel upper handlebar clamp bolts.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Important fitment notes

• For Triumph Bonneville America 2002–2008 carburettor models with the original upper handlebar holders shown in the listing drawing.
• Check the exact model and original components before installation. Aftermarket or modified assemblies may require different hardware.
• Handlebars, upper clamps, lower risers, riser-to-yoke mounting fixings, steering-yoke pinch bolts and control-clamp bolts are not included.
• Photographs illustrate the hardware and fitting positions. The contents table defines the actual supplied quantities.

Model-specific aftermarket replacements

Biker Bling selects these replacements for the listed original fixing positions. The Triumph references identify the original components replaced, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.

Materials and appearance: The supplied bolts are stainless steel. Their appearance may differ from the originals. Material alone does not establish equivalent mechanical strength.

When should you replace these fixings?

• Damaged drive recesses: Worn heads can make correct removal and tightening difficult.
• Corroded or missing fixings: Inspect the complete clamp arrangement before refitting.
• Handlebar adjustments: Check the bar, clamps and mounting threads whenever the assembly is disturbed.

New bolts cannot repair cracked clamps, damaged mounting threads or a handlebar that is incorrectly seated.

Fitting information

Handlebar security affects steering. Follow Triumph’s workshop procedure for bar positioning, clamp orientation, fastener specification, tightening order and torque. Start the correct bolts by hand and do not use them to pull a misaligned clamp into position. Apply thread treatments only where specified. Check the handlebar is secure and that steering movement, cables, hoses and throttle return remain normal before riding. Have damaged or uncertain mountings inspected by a qualified motorcycle technician.

For general guidance, read our motorcycle bolt strength grades guide. Triumph’s workshop procedure takes precedence.

Customer questions

Does this kit include the lower riser mounting bolts?

No. It supplies the four upper handlebar clamp bolts shown in the listing drawing, plus one anti-seize compound pack (7 g).

Will these suit aftermarket handlebars or risers?

Check the replacement component manufacturer’s requirements. Modified clamp arrangements may need different hardware.