Headlight Mounting Bolt and Washer Kit for Bonneville & T100
2x stainless steel bolts and 2x stainless steel washers for the original headlight side-mounting positions. The kit supplies the left and right headlight mounting hardware shown in the listing drawing. Designed for the Triumph Bonneville & T100 2009–2015 (EFI).
What you receive
- 2x stainless steel headlight mounting bolts.
- 2x stainless steel mounting washers.
- 1x Biker Bling anti-seize compound pack (7 g).
Original Triumph fixing references
| Fitting position / component | Supplied quantity | Original Triumph fixing reference |
|---|---|---|
| Left and right headlight side-mounting bolts | 2x | T3200450 |
| Headlight mounting washers | 2x | T3555033 |
Important fitment notes
- For Triumph Bonneville & T100 2009–2015 fuel-injected models with the original headlight side mounts shown in the listing drawing.
- Check the exact model and original components before installation. Aftermarket or modified assemblies may require different hardware.
- The headlight, lens, rim, side brackets, rubbers, spacers and wiring are not included. This is not a headlight-rim fixing kit.
- Photographs illustrate the hardware and fitting positions. The contents table defines the actual supplied quantities.
Model-specific aftermarket replacements
Biker Bling selects these replacements for the listed original fixing positions. The Triumph references identify the original components replaced, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.
Materials and appearance: The supplied bolts and mounting washers are stainless steel. Their appearance may differ from the originals. Material alone does not establish equivalent mechanical strength.
When should you replace these fixings?
- Corroded or marked heads: Inspect the mounting hardware during headlight servicing.
- Damaged threads or washers: Check both side mounts and their supporting parts.
- Headlight adjustment: Inspect bracket alignment and mounting rubbers before refitting.
Replacement bolts cannot repair cracked headlight brackets, damaged threads or worn mounting rubbers.
Fitting information
Support the headlight and match each fixing to its original position. Follow Triumph’s instructions for washer placement, mounting alignment, thread condition and tightening. Do not use bolts to pull a distorted bracket into place. Apply anti-seize only where appropriate. After fitting, confirm the headlight is secure, check the beam aim and verify the wiring is not pinched or strained through steering movement.
For general guidance, read our stainless steel motorcycle bolt fitting guide. Triumph’s workshop procedure takes precedence.
Customer questions
Are both mounting washers included?
Yes. The kit contains 2x headlight mounting bolts, 2x washers and one anti-seize compound pack (7 g).
Does this include the headlight rim bolts?
No. This kit is for the headlight side-mounting positions shown in the drawing.
















Reviews
There are no reviews yet.