Engine casing cover bolts for Triumph Speed Twin 1200 Cafe Racer Edition 2026

This model-specific kit supplies 45x stainless steel replacement bolts for the original clutch, alternator, sprocket and sump casing positions on the Triumph Speed Twin 1200 Cafe Racer Edition 2026. The contents table identifies the supplied quantity, original Triumph reference and diagram item for each fitting area.

What you receive

• 45x stainless steel engine casing cover bolts.
• 1x Biker Bling anti-seize compound pack (7 g).

Fitting position / component	Quantity	Original Triumph reference	Diagram item
Left clutch cover	9x	T3205072	11
Left clutch cover	4x	T3205093	12
Left clutch cover	2x	T3205082	13
Right alternator cover	10x	T3205072	11
Sprocket cover	4x	T3200148	25
Sump casing	16x	T3200148	3
Total bolts supplied	45x	Anti-seize pack supplied separately

The references identify original Triumph components, not Biker Bling product codes. The kit supplies aftermarket replacements, not genuine Triumph-branded hardware. Repeated item numbers on separate drawings do not multiply the quantities.

Model-specific engine cover fixings

Keep the clutch cover bolts, alternator cover bolts and sprocket cover fixings organised by their intended locations. These external engine cover bolts are separate from the structural fasteners joining the crankcase halves. The sump casing bolts are listed as their own group.

When comparing replacement engine bolt kits, check the covered locations, quantities and original references. Read our guide to generic and model-specific motorcycle bolt kits and browse the Triumph Speed Twin 1200 Cafe Racer Edition 2026 fastener range.

Important fitment notes

• Compatibility: Triumph Speed Twin 1200 Cafe Racer Edition 2026 with the matching original Cafe Racer Edition engine covers. The 2026 coverage follows the UK catalogue; check the edition and original cover arrangement.
• Verify before fitting: Match the exact model, engine number and original components. Aftermarket covers, case savers or protective accessories may need different fasteners.
• Materials and appearance: Supplied bolts are stainless steel. Head appearance may differ from Triumph’s original hardware. Stainless material alone does not establish equivalent mechanical strength. Hardware photographs may be generic.
• Exclusions: Covers, gaskets, seals, locating dowels, drain plugs, cam-cover bolts, structural crankcase bolts, breather-plate bolts, coolant-return-elbow bolts, badge fixings, cable brackets and internal engine or pump fixings are not included.

Casing-only scope: Decorative cover-badge fixings are excluded. This kit contains 45x casing and sump bolts.

When should you replace engine casing bolts?

• Corroded or damaged heads: Inspect the fixings before cover servicing.
• Damaged threads or missing bolts: Check the bolts and casing threads before choosing replacements.
• Cover maintenance: Identify the correct fitting positions before removing a cover.

Replacement bolts cannot repair cracked casings, stripped threads or damaged sealing faces. Find the cause of looseness or leakage before reassembly.

Fitting information

• Preparation: Support the motorcycle securely, allow it to cool and follow Triumph’s exact workshop procedure.
• Correct locations: Keep each cover group separate, start the correct bolts by hand and do not pull a misaligned cover into place with a bolt.
• Seals and gaskets: Renew disturbed sealing components where specified. Gaskets and seals are not supplied.
• Tightening and thread condition: Follow Triumph’s specified torque, sequence and thread treatment. Anti-seize changes friction and the torque-to-clamping-force relationship; the included pack is not an instruction to lubricate every fixing.
• Final checks: Restore specified fluid levels where disturbed, confirm secure assembly and inspect for leaks before riding. Have uncertain work completed or checked by a qualified motorcycle technician.

Read our guide to fitting stainless steel motorcycle bolts and motorcycle bolt strength grades guide. Triumph’s workshop procedure takes precedence.

Customer questions

How many bolts are included?

45x stainless steel bolts, allocated to the original external covers and sump casing listed above. Also included is 1x Biker Bling anti-seize compound pack (7 g), separately from the bolt total.

Does this replace every bolt shown in the original drawings?

No. Only the fitting groups listed in the contents table are supplied. Dowels, drain plugs, internal components and decorative badge fixings shown elsewhere in the drawings are excluded.

Can I use the same kit on another Triumph twin?

Check the exact model, generation and original cover references. A shared engine capacity alone does not establish that every cover fixing matches.