Bar-End / Handlebar End Weight Bolt Kit for Sprint 900

2x stainless steel replacement bolts for the original left and right external handlebar end weight fixings on the Triumph Sprint 900 1992–1998. There is 1x bolt for each original weight. Browse the matching Triumph Sprint 900 1992–1998 fastener range.

What you receive

• 1x stainless steel replacement bolts — left handlebar end weight.
• 1x stainless steel replacement bolts — right handlebar end weight.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Fitting position / component	Supplied quantity	Original Triumph fixing reference
Left handlebar end weight	1x	T3330933
Right handlebar end weight	1x	T3330933
Total supplied bolts	2x	Allocated to the positions above

Important fitment notes

• Compatibility: For Triumph Sprint 900 1992–1998 with the matching original mounting arrangement.
• For the original Sprint / Sprint Executive end weights and Sprint Sport from VIN 62113. The earlier Sprint Sport end arrangement is excluded. Check the original weight and its mounting before ordering.
• Check before ordering: Match the original assembly and fixing references, especially if components have been modified or replaced.
• Exclusions: Handlebar weights, internal bushes, sleeves, spacers, handguards and bar-end mirrors are not included.

Model-specific aftermarket replacements

Biker Bling selects these replacement fasteners for the original positions identified in the table. The Triumph references identify the original hardware being replaced, not Biker Bling product codes. These are aftermarket components, not genuine Triumph-branded parts.

Materials and appearance: The supplied bolts are stainless steel. Their heads may look different from Triumph’s originals. Stainless steel describes the material; it does not by itself establish equivalent mechanical strength.

The photographs are generic examples of the supplied hardware style. Refer to the contents table for the actual kit quantity and mounting allocation; pictured assemblies are not included.

When should you replace these fixings?

• Corroded or damaged heads: Inspect worn hardware before removal and refitting.
• Damaged threads or missing bolts: Check the original mounting threads and supporting components before replacing a fixing.
• During component servicing: Keep each bolt group with its original position and inspect the mounting faces before reassembly.

A loose weight may indicate damaged internal mounting parts. Replacement bolts alone will not repair worn bushes or an incompatible weight assembly.

Fitting information

Match each replacement to the original weight assembly and follow Triumph’s tightening and thread-treatment instructions. Use fitting compounds only where specified. Keep the original supporting components in their intended order. Check both weights are secure and that the right-hand weight does not obstruct throttle rotation or return, including with the steering turned fully each way.

For general background, read our guide to threadlocker and anti-seize on motorcycle bolts. Triumph’s workshop procedure takes precedence.

Customer questions

Will these fit aftermarket bar-end mirrors?

Check the mirror manufacturer’s mounting arrangement. Expansion fittings or replacement weights may need different bolts; the original-layout fitment here does not automatically cover aftermarket mirrors.

How many bolts are supplied?

2x stainless steel bolts, allocated as shown in the contents table, plus 1x Biker Bling anti-seize compound pack (7 g).