Engine Casing Cover Bolt Kit for Triumph Speed Triple 1200 RR Breitling

This model-specific kit supplies 64x stainless steel engine casing cover bolts for the listed original cover-mounting positions on the Triumph Speed Triple 1200 RR Breitling 2024–2025. The allocation includes clutch cover bolts, alternator cover bolts, crank and balancer cover fixings, sprocket cover fixings, breather cover fixings and sump bolts.

The Breitling Limited Edition was introduced in 2024 and is also described by Triumph as MY2025. Triumph’s RR engine-cover and sump catalogues explicitly include this edition. This kit follows the matching 64x cover-bolt allocation; the special-edition bodywork and trim are outside its contents.

Browse the Triumph Speed Triple 1200 RR Breitling 2024–2025 fastener range.

Model and kit summary

Motorcycle	Triumph Speed Triple 1200 RR Breitling
Model years	2024 launch; MY2025 catalogue designation
Supplied bolts	64x stainless steel replacement bolts
Also included	1x Biker Bling anti-seize compound pack (7 g)

What you receive

• 64x stainless steel engine casing cover bolts, allocated by fitting location below.
• 1x Biker Bling anti-seize compound pack (7 g).

Fitting position / component	Supplied quantity	Original Triumph fixing reference
Right clutch casing	12x	T3205132
Right crank casing cover	8x	T3205132
Right balancer casing cover	2x	T3205132
Left alternator casing	12x	T3205102
Sprocket cover	3x	T3205150
Top breather cover	9x	T3200148
Sump / oil pan	18x	T3200148
Total bolts supplied	64x	Allocated to the positions above

The Triumph references identify the original fixings being replaced. They are not Biker Bling product codes, and genuine Triumph-branded bolts are not supplied.

Important fitment notes

• Compatibility: For Triumph Speed Triple 1200 RR Breitling Limited Edition, introduced in 2024 and also catalogued as MY2025, with the matching original covers and mounting positions listed in the table.
• Check before fitting: Match the exact motorcycle, original fixing reference and cover arrangement. Modified casings or aftermarket covers may require different hardware.
• Defined contents: This is a cover-mounting bolt kit. Casings, covers, gaskets, seals, locating dowels, drain plugs and internal engine fasteners are not included.
• Photographs: The bolt photographs illustrate the supplied hardware style and may be generic. The contents table defines the kit quantities and fitting locations.

Engine cover bolts for the RR Breitling Limited Edition

The bolts are selected for the listed RR engine-cover positions, with separate allocations for each cover. Keep the groups separated during fitting and match each replacement to its original location rather than treating all 64x bolts as interchangeable.

Materials and appearance: The replacement bolts are stainless steel. Their appearance may differ from the original Triumph hardware. Stainless steel describes the material; it does not by itself establish equivalent mechanical strength.

When should you replace engine casing bolts?

• Damaged heads or threads: Inspect worn fixings and the cover-mounting threads before choosing replacements.
• Missing hardware: Identify the correct fixing for the original position rather than substituting an unrelated bolt.
• Cover servicing: Check the bolts, sealing faces and supporting components whenever a cover is removed.

Replacement bolts cannot repair cracked casings, stripped threads or distorted covers. Find the cause of looseness or leakage before reassembly.

Fitting information

• Preparation: Work on a securely supported, cool motorcycle and follow Triumph’s workshop procedure for each cover.
• Correct positions: Match the bolt groups to the listed covers and start the correct fixings by hand. Do not use bolts to pull a misaligned cover into place.
• Sealing arrangements: Preserve the required locating and sealing arrangements. Renew disturbed gaskets or seals where Triumph specifies.
• Tightening and thread condition: Follow the specified tightening order, torque and thread condition. The included anti-seize pack is not an instruction to lubricate every fixing.
• Fluid and operation checks: Follow the required draining, refilling and leak-check procedures for any disturbed fluid-containing cover. Have uncertain engine work completed or checked by a qualified motorcycle technician.

For general background, read our motorcycle bolt strength grades guide. Triumph’s workshop procedure takes precedence.

Customer questions

How many bolts are included?

The kit supplies 64x bolts: 22x across the three listed right-side covers, 12x for the alternator casing, 3x for the sprocket cover, 9x for the breather cover and 18x for the sump. It also includes 1x Biker Bling anti-seize compound pack (7 g).

Are locating dowels, gaskets or the drain plug included?

No. The kit contains the listed replacement bolts and anti-seize pack. Dowels, gaskets, seals and drain plugs are not supplied.

Why does this listing mention 2024–2025?

This identifies the Breitling Limited Edition introduced in 2024 and also catalogued as model year 2025. Match the edition and the original fixing references in the table; a registration date alone does not identify the cover arrangement.