Engine Casing Cover Bolt Kit for Triumph Speed Triple 1200 RX

This model-specific kit supplies 54x stainless steel engine casing cover bolts for the listed original mounting positions on the Triumph Speed Triple 1200 RX 2026. The engine cover bolts are grouped below for the clutch, crank, balancer and alternator covers, sprocket cover and sump casing.

Browse the Triumph Speed Triple 1200 RX 2026 fastener range.

Model and kit summary

Specification	Details
Motorcycle	Triumph Speed Triple 1200 RX
Model years covered	2026
Model identification	Speed Triple 1200 RX limited edition, 2026 model year
Supplied bolts	54x stainless steel replacement bolts
Also included	1x Biker Bling anti-seize compound pack (7 g)

What you receive

• 54x stainless steel engine casing cover bolts, allocated to the positions below.
• 1x Biker Bling anti-seize compound pack (7 g).

Fitting position / component	Supplied quantity	Original Triumph fixing reference	Diagram item
Right clutch cover	12x	T3205132	(21)
Right crank cover	8x	T3205132	(21)
Right balancer cover	2x	T3205132	(21)
Left alternator cover	11x	T3205102	(23)
Sprocket cover	3x	T3205150	(25)
Sump casing	18x	T3200148	(6)
Total bolts supplied	54x	Listed positions	—

The item numbers refer to the original engine-cover, sump drawings. The references identify original Triumph components, not Biker Bling product codes. These are aftermarket replacement bolts, not genuine Triumph-branded parts.

Important fitment notes

• Compatibility: For Triumph Speed Triple 1200 RX 2026 with the original covers and fixing arrangement listed above. Speed Triple 1200 RX limited edition, 2026 model year.
• Verify before fitting: Match the original fixing references and cover positions. Registration dates, engine capacity or a similar model name alone do not establish compatibility. Aftermarket covers may require different hardware.
• Defined scope: The contents table defines this kit. Cam-cover bolts, crankcase-half joining bolts, internal pump fixings, breather-cover bolts, coolant-return elbow bolts, decorative cover or badge fixings and cable-bracket bolts are not supplied.
• Exclusions: Casings, covers, gaskets, seals, locating dowels, drain plugs and drain bolts, sump guards and internal engine components are not included.
• Photographs: Hardware photographs may be generic. Use the listed contents, quantities and fitting positions when ordering.

Model-specific aftermarket replacements

The kit groups replacement motorcycle engine cover bolts by their intended original mounting locations. Keep the clutch cover bolts, alternator cover bolts and sump casing fixings separate during fitting. A shared Triumph part number can occur at several positions; the table states the total supplied for each listed group.

Materials and head style: The supplied bolts are stainless steel. See the hardware photographs for their appearance. Stainless steel describes the material and does not by itself establish mechanical-strength equivalence to every original fastener.

When should you replace engine cover bolts?

• Damaged heads or threads: Inspect worn fasteners and the threads in the casing before selecting replacements.
• Missing fixings: Match each original location and reference rather than substituting an unrelated bolt.
• Cover servicing: Check the fixings, sealing faces and cover condition while accessible.

New bolts cannot repair cracked covers, stripped threads or distorted sealing faces. Identify the cause of looseness or leakage before reassembly.

Fitting information

• Preparation: Work on a securely supported, cool motorcycle and follow Triumph’s workshop procedure for the exact model and cover.
• Correct positions: Organise the original bolt locations, match each replacement and start bolts by hand. Do not use a bolt to pull a misaligned cover into place.
• Sealing and fluids: Preserve the specified locating and sealing arrangements. Renew disturbed gaskets or seals, drain and refill fluids, and check for leaks as required by Triumph.
• Tightening and compounds: Follow the specified torque, sequence and thread condition. Use anti-seize only where appropriate; the included pack is not an instruction to lubricate every fixing.
• Final checks: Confirm secure assembly and leak-free operation. Have uncertain engine work completed or checked by a qualified motorcycle technician.

Before fitting, read our guide to fitting stainless steel motorcycle bolts. Triumph’s workshop instructions take precedence.

Customer questions

How many bolts are included?

The kit contains 54x stainless steel bolts for the locations in the contents table, plus 1x Biker Bling anti-seize compound pack (7 g).

Does this kit contain gaskets or drain plugs?

No. It supplies the listed replacement bolts and anti-seize pack. Covers, gaskets, seals, dowels, drain plugs and drain bolts are not supplied.

Is this the same listing as the Speed Triple 1200 RS kit?

No. This RX kit uses the 2026 RX catalogue allocation, including 11x alternator-cover bolts. Use the kit listed for the exact motorcycle and cover arrangement.