Engine casing cover bolts for Triumph Tiger 900 GT 2024–2026

This model-specific kit supplies 51x stainless steel replacement bolts for the original clutch, crank, alternator, sprocket, balancer and sump casing positions on the Triumph Tiger 900 GT 2024–2026. Quantities, original Triumph references and diagram callouts are listed below.

What you receive

• 51x stainless steel engine casing cover bolts.
• 1x Biker Bling anti-seize compound pack (7 g).

Fitting position / component	Quantity	Original Triumph reference	Diagram item
Clutch cover bolts	9x	T3200147	24
Clutch cover long bolts	2x	T3200180	15
Crank cover bolts	6x	T3205067	4
Crank cover long bolts	2x	T3205082	7
Alternator cover bolts	10x	T3200190	9
Alternator cover long bolts	2x	T3200180	15
Sprocket cover bolts	2x	T3205067	4
Balancer cover bolts	4x	T3205066	31
Sump casing bolts	14x	T3202303	Sump 5
Total bolts	51x	Anti-seize supplied separately

The quantities describe the external cover positions supplied in this kit. Repeated diagram callouts do not multiply the supplied quantity. Cable-guide, protector and breather fixings shown elsewhere in the original drawing are excluded.

Triumph references identify the original components. Biker Bling supplies aftermarket replacements, not genuine Triumph-branded hardware.

Model-specific engine cover fixings

Keep the clutch cover bolts, alternator cover bolts and sprocket cover bolts organised by location. Match each group to the original mounting positions; this kit does not replace the structural bolts joining the crankcase halves.

The oil/water-pump assembly sits inside the engine and is outside this external cover kit. No internal pump bolts or drain-plug sealing washers are supplied.

When comparing replacement engine bolt kits, check the covered locations, quantities and original references. Read our guide to generic and model-specific motorcycle bolt kits and browse the Triumph Tiger 900 GT 2024–2026 fastener range.

Important fitment notes

• Compatibility: Triumph Tiger 900 GT 2024–2026 with the original 888cc engine covers; from vin bp6441. Check the exact model, engine number, VIN and original components.
• Modified parts: Replacement covers, case savers or protective accessories may require different hardware. Their additional mounting bolts are not included.
• Materials and head style: The replacement bolts are stainless steel. Head appearance may differ from the originals. Material alone does not establish mechanical-strength equivalence. Hardware photographs may be generic.
• Not included: Covers, gaskets, seals, dowels, drain plugs, breather-cover bolts, coolant-return elbow bolts, internal oil/water-pump fixings, structural crankcase bolts, decorative badge or protector fixings and separate cable/bracket hardware.

When should you replace engine casing bolts?

• Corroded or damaged heads: Inspect the fixings before cover servicing.
• Damaged threads or missing bolts: Check both the bolt and its mounting threads.
• Engine-cover maintenance: Retain the original fitting positions and identify the correct replacements before reassembly.

Replacement bolts cannot repair stripped threads, cracked covers or damaged sealing faces.

Fitting information

• Identify the positions: Use the matching fitting diagram and the exact Triumph workshop procedure. Start the correct fasteners by hand; do not pull a misaligned cover into place with a bolt.
• Seals and gaskets: Replace disturbed gaskets and sealing components where specified. Covers and replacement gaskets are not supplied.
• Tightening and thread condition: Follow the specified sequence, torque and thread treatment. Anti-seize is not an instruction to lubricate every fixing; it changes the torque-to-clamping-force relationship. Use compounds only where appropriate to the specified installation.
• Final checks: Restore specified oil and coolant levels where disturbed, inspect for leaks and confirm secure assembly before riding. Have uncertain work completed or checked by a qualified motorcycle technician.

Read our guide to fitting stainless steel motorcycle bolts and motorcycle bolt strength grades guide. Triumph’s workshop procedure takes precedence.

Customer questions

Does this kit include every bolt shown in the original drawing?

No. It contains the 51x external casing and sump bolts listed in the contents table. Breather-cover, badge, protector, cable-guide and internal pump fixings are excluded.

Is anti-seize included?

Yes. The kit includes 1x Biker Bling anti-seize compound pack (7 g), separately from the bolt total. Use it only where the fitting procedure permits.