Fairing and bodywork fixing kit for Triumph Tiger 900 2020–2023
This model-specific kit brings together stainless steel replacement bolts and bodywork fixings for the Triumph Tiger 900 2020–2023 with matching original fittings. Engine capacity: 888 cc.
240 pieces across ten fitting areas. The listed groups cover the screen, infill and side panels, nose cone, tank panels, front fairings, belly pan, rear fairings and hanger, grab rail, front mudguard, upper and lower chain guards, and undertray.
Stainless steel offers corrosion resistance and still requires appropriate cleaning and care. Clips, nuts and plastic components retain the materials stated in the contents.
Why choose a model-specific Tiger 900 fairing bolt kit?
The kit distinguishes fully threaded bolts, shouldered bolts, cap head bolts, small domed head bolts, self-tapping screws, clips, nuts and washers by original mounting position. Keep each group organised by area and diagram item.
Component styles and fitting details
Hardware photographs are shared illustrations of component styles. The model-specific contents, original references and location diagrams identify the supplied positions. Photographs are not to scale. Head and drive arrangements vary between fixing groups; the generic measurement illustration does not describe every bolt in this kit.
Read our guide to generic and model-specific motorcycle bolt kits.
When should you replace fairing and bodywork fixings?
Inspect fasteners when removing panels or servicing these areas. Replace missing fixings and damaged heads, threads, nuts or clips with the appropriate type for the position. New hardware cannot repair cracked panels, enlarged holes or damaged mounting threads.
What you receive
- 95x stainless steel bolts.
- 85x nylon washers.
- 27x stainless steel self-tapping screws.
- 21x spire clips / captive nuts.
- 4x plastic push clips.
- 7x flange nuts.
- 1x plastic wing nut.
Total: 240 pieces across ten fitting areas.
Model-specific kit contents
| Fitting area | Component | Quantity | Original Triumph reference / position | Diagram item |
|---|---|---|---|---|
| Screen | Shouldered bolts | 2x | T3331065 | 4 |
| Screen | Fully threaded bolts | 2x | T3330941 | 12 |
| Screen | Nylon washers | 2x | Supplementary supplied washers | + |
| Infill side panels and nose cone | Self-tapping screws | 3x | T3331436 | 22 |
| Infill side panels and nose cone | Small domed head bolts | 2x | T3331043 | 27 |
| Infill side panels and nose cone | Shouldered bolts | 2x | T3331076 | 28 |
| Infill side panels and nose cone | Cap head bolts | 4x | T3050341 | 29 |
| Infill side panels and nose cone | Spire clips / captive nuts | 2x | T3350123 | 36 |
| Infill side panels and nose cone | Fully threaded bolts | 10x | T3330943 | 37 |
| Infill side panels and nose cone | Nylon washers | 16x | Supplementary supplied washers | + |
| Tank panels | Fully threaded bolts | 6x | T3330943 | 22 |
| Tank panels | Shouldered bolts | 2x | T3331061 | 23 |
| Tank panels | Fully threaded bolts | 2x | T3330726 | 25 |
| Tank panels | Spire clips / captive nuts | 4x | T3350129 | 26 |
| Tank panels | Nylon washers | 8x | Supplementary supplied washers | + |
| Front fairings | Fully threaded bolts | 4x | T3330726 | 14 |
| Front fairings | Fully threaded bolts | 8x | T3330943 | 15 |
| Front fairings | Fully threaded bolts | 2x | T3331010 | 16 |
| Front fairings | Spire clips / captive nuts | 8x | T3350129 | 17 |
| Front fairings | Spire clips / captive nuts | 2x | T3350141 | 18 |
| Front fairings | Nylon washers | 2x | T3555033 | 20 |
| Front fairings | Plastic push clips | 4x | T3701150 | 21 |
| Front fairings | Nylon washers | 12x | Supplementary supplied washers | + |
| Belly pan | Fully threaded bolts | 2x | T3200190 | 4 |
| Belly pan | Fully threaded bolts | 3x | T3332655 | 9 |
| Belly pan | Spire clips / captive nuts | 2x | T3350161 | 10 |
| Belly pan | Flange nuts | 1x | T3350010 | 11 |
| Belly pan | Cap head bolts | 2x | T3202304 | 12 |
| Belly pan | Nylon washers | 7x | Supplementary supplied washers | + |
| Rear fairings and hanger | Fully threaded bolts | 2x | T3200820 | 9 |
| Rear fairings and hanger | Fully threaded bolts | 2x | T3202323 | 10 |
| Rear fairings and hanger | Fully threaded bolts | 2x | T3330627 | 12 |
| Rear fairings and hanger | Fully threaded bolts | 2x | T3330891 | 13 |
| Rear fairings and hanger | Nylon washers | 5x | T3550129 | 14 |
| Rear fairings and hanger | Fully threaded bolts | 2x | T3330941 | 15 |
| Rear fairings and hanger | Flange nuts | 4x | T3350004 | 16 |
| Rear fairings and hanger | Self-tapping screws | 2x | T3331436 | 17 |
| Rear fairings and hanger | Fully threaded bolts | 1x | T3330943 | 18 |
| Rear fairings and hanger | Spire clips / captive nuts | 1x | T3350123 | 19 |
| Rear fairings and hanger | Nylon washers | 6x | Supplementary supplied washers | + |
| Grab rail | Cap head bolts | 4x | T3205781 | 11 |
| Grab rail | Fully threaded bolts | 1x | T3330941 | 15 |
| Grab rail | Nylon washers | 5x | Supplementary supplied washers | + |
| Front mudguard | Shouldered bolts | 4x | T3330848 | 4 |
| Front mudguard | Small domed head bolts | 2x | T3331042 | 5 |
| Front mudguard | Self-tapping screws | 4x | T3331436 | 6 |
| Front mudguard | Nylon washers | 2x | Supplementary supplied washers | + |
| Upper and lower chain guards | Fully threaded bolts | 3x | T3331726 | 5 |
| Upper and lower chain guards | Cap head bolts | 2x | T3202304 | 19 |
| Upper and lower chain guards | Nylon washers | 5x | Supplementary supplied washers | + |
| Undertray and rear side panels | Fully threaded bolts | 7x | T3330941 | 12 |
| Undertray and rear side panels | Fully threaded bolts | 6x | T3331010 | 13 |
| Undertray and rear side panels | Spire clips / captive nuts | 2x | T3350111 | 14 |
| Undertray and rear side panels | Self-tapping screws | 18x | T3331436 | 15 |
| Undertray and rear side panels | Fully threaded bolts | 2x | T3332648 | 16 |
| Undertray and rear side panels | Flange nuts | 2x | T3350010 | 17 |
| Undertray and rear side panels | Plastic wing nut | 1x | T3351100 | 18 |
| Undertray and rear side panels | Nylon washers | 15x | Supplementary supplied washers | + |
Original Triumph references identify the fixing or original washer position. Supplied hardware is aftermarket and is not genuine Triumph-branded stock. A reference at a nylon washer position identifies the location and does not claim that the original washer was nylon.
Nylon washer allocation
The 85 nylon washers provide one for each listed non-shouldered bolt: 2 for screen, 16 for infill side panels and nose cone, 8 for tank panels, 14 for front fairings, 7 for belly pan, 11 for rear fairings and hanger, 5 for grab rail, 2 for front mudguard, 5 for upper and lower chain guards, 15 for undertray and rear side panels. Original washer callouts are included within these totals and must not be added again. No supplementary nylon washers are allocated to shouldered bolts or self-tapping screws. A plus sign identifies supplementary washers.
Fitment and coverage
- Compatibility: Triumph Tiger 900 2020–2023, 888 cc, with matching original bodywork and mounting arrangements.
- Model identification: standard Tiger 900 2020–2023, 888 cc. Check the original bodywork and fixing arrangements. GT, GT Pro, Rally, Rally Pro and Tiger 850 Sport are separate model allocations.
- Listed positions only: the kit covers the groups in the contents table, rather than every fastener visible in an exploded drawing.
- Original fittings: retain rubber grommets, sleeves, spacers and unlisted fittings. Modified panels, aftermarket screens, tail tidies and accessory brackets may require different hardware.
- Exclusions: bodywork, screen, grab rail, brackets, grommets, sleeves, spacers, screen adjustment mechanisms and supports, headlight and instrument mountings, internal light fixings, engine casing bolts and unlisted wheel, brake, suspension or chassis fasteners are not supplied.
Fitting information
Support the motorcycle securely and work with cool components. Keep each fixing group identified by its original location. Match the thread, length, shoulder, head clearance and washer arrangement before fitting. Start threads by hand and never pull a misaligned panel into place with a bolt. Keep shouldered bolts in their specified positions.
Follow Triumph’s workshop procedure, tightening specification and required thread condition for each fixing. Stainless material alone does not establish equivalent mechanical strength. Apply fitting compounds only where permitted, as lubrication affects tightening behaviour. Check panel seating, clearances, retained spacers and secure attachment before riding.
Read our guide to fitting stainless steel motorcycle bolts and browse the Tiger 900 2020–2023 range.
Customer questions
Is this one kit or ten separate kits?
This is one full kit organised into ten fitting areas.
Are nylon washers included?
Yes. The 85 nylon washers are included in the 240-piece total. Original washer callouts are already counted.
Are the screen, bodywork and grab rail included?
Only their listed fixings are supplied.
Does this include engine casing bolts?
Engine casing bolts are a separate kit.
























































Reviews
There are no reviews yet.