Fairing and bodywork fixing kit for Triumph Trophy SE 1215 2013-2017

This model-specific kit contains 258-266 pieces across 9 fitting areas for the Triumph Trophy SE 1215 2013-2017, 1215 cc, with matching original bodywork. Select the original VIN range to obtain the appropriate fixing allocation.

The allocation covers screen attachment, cockpit and panel covers, right and left side fairings, radiator infills and foot deflectors, tank cover, rear panels and rack cover, front mudguard, and rear mudguard and spray guard.

Why choose a model-specific Trophy SE 1215 fairing bolt kit?

Replace missing or worn panel hardware with fixings allocated to the listed model positions. The contents distinguish shouldered bolts, fully threaded bolts, cap head bolts, self-tapping screws and accompanying fixings. Original Triumph references and orange diagram numbers help identify each fitting position.

When should you replace fairing and bodywork fixings?

Inspect hardware when removing panels or servicing the listed bodywork areas. Replace missing fixings and damaged heads, threads, nuts or clips with the appropriate type. New fixings cannot repair cracked panels, enlarged holes or damaged mounting threads. Read our guide to when motorcycle bolts should be replaced.

What you receive

• 6x shouldered bolts
• 74-82x fully threaded bolts
• 15x cap head bolts
• 16x M5 long spire clips (T3351052)
• 18x M5 short spire clips (T3350129)
• 4x M5 spire clips (T3350123)
• 2x plastic push clips (T3701121)
• 8-10x plastic screw-type rivets (T3701170)
• 8-10x flanged locknuts
• 8-16x self-tapping screws
• 89-97x nylon washers

Quantities depend on the selected VIN range. Nylon washers are included in each total. Only the applicable alternatives are supplied.

Original VIN range	Total pieces	Nylon washers
Up to VIN 583432	266	97
VIN 583433-616986	258	89
From VIN 616987	262	91

Model-specific kit contents

Fitting area	Component	Quantity	Original reference or allocation	Diagram item
Screen attachment	Shouldered bolts	6x	T3331062	24
Cockpit and panel covers	Fully threaded bolts	2x	T3330955	24
Cockpit and panel covers	Fully threaded bolts	23x	T3330941	25
Cockpit and panel covers	M5 short spire clips	13x	T3350129	23
Cockpit and panel covers	M5 spire clips	2x	T3350123	35
Cockpit and panel covers	Plastic push clips	2x	T3701121	29
Cockpit and panel covers	Nylon washers	25x	Supplementary supplied washers	+
Right side fairings	Fully threaded bolts	7x	T3330941	12
Right side fairings	Fully threaded bolts (Up to VIN 583432)	4x	T3330941	16
Right side fairings	Self-tapping screws (From VIN 583433)	4x	T3331414	16
Right side fairings	M5 long spire clips	7x	T3351052	11
Right side fairings	Nylon washers	11 up to VIN 583432 / 7 from VIN 583433x	Supplementary supplied washers	+
Left side fairings	Fully threaded bolts	7x	T3330941	12
Left side fairings	Fully threaded bolts (Up to VIN 583432)	4x	T3330941	16
Left side fairings	Self-tapping screws (From VIN 583433)	4x	T3331414	16
Left side fairings	M5 long spire clips	7x	T3351052	11
Left side fairings	M5 short spire clips	1x	T3350129	17
Left side fairings	Plastic screw rivets	2x	T3701170	18
Left side fairings	Nylon washers	11 up to VIN 583432 / 7 from VIN 583433x	Supplementary supplied washers	+
Radiator infills and foot deflectors	Fully threaded bolts	8x	T3330941	2
Radiator infills and foot deflectors	Fully threaded bolts	4x	T3330727	4
Radiator infills and foot deflectors	Cap head bolts	1x	T3050342	20
Radiator infills and foot deflectors	M5 spire clips	2x	T3350123	1
Radiator infills and foot deflectors	Flanged locknuts	6x	T3350003	18
Radiator infills and foot deflectors	Flanged locknuts	2x	T3350004	19
Radiator infills and foot deflectors	Nylon washers	13x	Supplementary supplied washers	+
Tank cover	Fully threaded bolts	2x	T3330941	30
Tank cover	Fully threaded bolts	2x	T3338989	33
Tank cover	Nylon washers	4x	Supplementary supplied washers	+
Rear panels and rack cover	Fully threaded bolts	2x	T3330727	17
Rear panels and rack cover	Fully threaded bolts	11x	T3330941	20
Rear panels and rack cover	Plastic screw rivets	6x	T3701170	21
Rear panels and rack cover	M5 long spire clips	2x	T3351052	22
Rear panels and rack cover	Nylon washers	13x	Supplementary supplied washers	+
Front mudguard	Fully threaded bolts	6x	T3330941	4
Front mudguard	M5 short spire clips	4x	T3350129	3
Front mudguard	Nylon washers	6x	Supplementary supplied washers	+
Rear mudguard and spray guard	Self-tapping screws	8x	T3331414	5
Rear mudguard and spray guard	Cap head bolts	4x	T3205065	9
Rear mudguard and spray guard	Cap head bolts	4x	T3205067	11
Rear mudguard and spray guard	Cap head bolts	6x	T3205066	17
Rear mudguard and spray guard	Plastic screw rivets (Up to VIN 616986)	2x	T3701170	15
Rear mudguard and spray guard	Fully threaded bolts (From VIN 616987)	2x	T3330941	15
Rear mudguard and spray guard	Flanged locknuts (From VIN 616987)	2x	T3350010	19
Rear mudguard and spray guard	Nylon washers	14 up to VIN 616986 / 16 from VIN 616987x	Supplementary supplied washers	+

Original references identify original positions. Supplied components are aftermarket replacements, rather than genuine Triumph-branded stock. Replacement head style, drive or material may differ. Generic component photographs and original drawing details illustrate hardware types; compatibility is defined by the model-specific contents and diagrams. Supplied clips, plastic rivets and nylon washers retain their stated materials.

Nylon washer allocation

Includes 97 nylon washers up to VIN 583432, 89 from VIN 583433 to 616986, or 91 from VIN 616987. Supplementary washers provide one per included non-shouldered machine bolt. Shouldered bolts and self-tapping screws receive no supplementary nylon washer. Retain original screen washers, the original later lower-fairing washers, rubber mounts, collars, sleeves and spacers.

Fitment and VIN notes

For Triumph Trophy SE 1215 2013-2017, 1215 cc. VIN means Triumph’s frame-number sequence defining catalogue variants. Match the actual model, original bodywork and frame number; registration year alone does not establish fitment.

Up to VIN 583432, lower-fairing item 16 uses machine bolts. From VIN 583433 it uses self-tapping screws. Spray-guard item 15 uses plastic screw rivets up to VIN 616986; from VIN 616987 it uses machine bolts and locknuts. These production changes are identified by VIN, rather than assumed calendar years. Check the fitted assembly if it has previously been replaced.

This Trophy SE 1215 allocation includes 8 rear-mudguard self-tapping screws. Select the correct model as well as the VIN range.

What is retained or excluded?

Retain unlisted mounting hardware, original washers, sleeves, spacers, collars and rubber mounts. Special captive bosses T3351111, the special nut plate T2301078 and ratchet rivets T3701333 are retained. Mirror mounting studs, nuts and washers, the screen adjustment mechanism and subframe, stowage mechanism screws, rack, grab-rail and structural bracket mounts, main tank mounts, fuel cap, fuel pump, engine casing bolts, lamps, reflector fixings, brake and axle hardware, yokes, bar ends, handlebar clamps and footrest mounting bolts are excluded. Mirror cover panel screws are included. Panels, brackets and accessories are not supplied.

Fitting guidance

Compare each removed fixing with its allocated replacement and retain the original sleeve or shoulder arrangement. Follow Triumph’s workshop fitting and tightening instructions. Read our guide to generic and model-specific motorcycle bolt kits and guide to fitting stainless steel motorcycle bolts.

Customer questions

Is this a complete motorcycle bolt kit?

One kit covers the listed bodywork areas. Only the positions in the contents table and matching diagrams are included.

Are engine casing bolts included?

Engine casing bolts are not included in this fairing and bodywork fixing kit.

Which VIN option should I select?

Choose the frame-number range matching the motorcycle and check that its fitted bodywork uses the corresponding arrangement. Each option contains one applicable fixing allocation; alternatives are not combined.