Stainless Steel Clip-On Handlebar Clamp Bolt kit for CBR600F
This pair replaces the fixings securing the original left and right clip-on handlebars around the fork stanchions on Honda CBR600F 1999–2006. These are handlebar clamp bolts, separate from the fork-yoke pinch bolts and the brake, clutch or switchgear fixings.
What you receive
- 2x stainless steel handlebar-to-fork clamp bolts – 1x for each side.
- 1x Biker Bling anti-seize compound pack (7 g).
| Fitting position | Quantity |
|---|---|
| Left handlebar-to-fork clamp | 1x |
| Right handlebar-to-fork clamp | 1x |
| Total clamp bolts | 2x |
Exclusions: Handlebars, clamp assemblies, yoke bolts, switchgear fixings and control-clamp bolts are not supplied.
Important fitment notes
- Compatibility: For Honda CBR600F 1999–2006 with the original component arrangement described above. Check aftermarket or modified components before ordering.
- Aftermarket parts: These are aftermarket replacements, not genuine Honda-branded components.
- Product photographs: Generic photographs illustrate the supplied style. Use the contents list for this kit’s scope.
Material and head style: The replacement fasteners are stainless steel and their heads may differ from Honda’s originals. Material alone does not establish the mechanical strength required for a mounting position.
Original Honda part references
- 90100-MN8-910 – original handlebar clamp fixing listed for 1999–2000.
- 96300-08040-07 – original handlebar clamp fixing listed in the later assembly.
These Honda references identify the original mounting components. The supplied parts are aftermarket replacements, not genuine Honda parts. Match the correct fixing to its original position; alternative year references do not mean additional bolts are supplied.
Supplied bolt material: A2 (304) stainless steel. The material grade alone does not establish mechanical-strength equivalence to Honda’s original hardware.
When should you replace these fixings?
- Corroded or rounded heads: Check fixings that are difficult to remove or refit.
- Damaged threads: Inspect the bolt and clamp threads together.
- A loose handlebar: Check the clamp, fork surface and seating rather than assuming a new bolt will cure the problem.
Fitting information
- Handlebar security affects steering. Follow Honda’s fastener specification, clamp positioning, thread condition and tightening procedure.
- Do not pull a misaligned clamp into place with a bolt. Use anti-seize or other compounds only where specified.
- Turn the steering fully both ways and check normal throttle return, lever operation and cable/hose clearance.
- Do not ride with a loose handlebar or damaged clamp. Have uncertain mountings checked by a qualified motorcycle technician.
For general background, read our motorcycle bolt strength grades guide. Honda’s workshop procedure takes precedence.
Customer questions
Does this pack include top-yoke bolts?
No. It contains only the two handlebar-to-fork clamp bolts and the anti-seize pack.
Will these fit aftermarket clip-ons or risers?
Check the component manufacturer’s mounting arrangement. Modified handlebars, risers or replacement clamps may require different fasteners.






















Reviews
There are no reviews yet.