Handlebar End Bolts for the SC44 Fireblade
Renew the fixings holding the original bar-end weights to the handlebars of the Honda CBR929RR / CBR900RR SC44 2000–2001. This pair is for the two outer retaining positions, rather than the clip-on clamps or internal handlebar weight assemblies.
What you receive
- 2x A2 (304) stainless steel handlebar end retaining bolts – one per side.
- 1x Biker Bling anti-seize compound pack (7 g).
The kit supplies the two bolts only. Keep the original weights and internal fittings where serviceable; it is not a universal fitting kit for aftermarket bar ends.
Original Honda fixing references
| Fitting position / component | Supplied quantity | Original Honda fixing reference |
|---|---|---|
| Left and right external handlebar end weights | 2x | 90191-KBG-000 |
These numbers identify the original Honda fixing positions, not Biker Bling product codes. The supplied kit contains aftermarket replacements, not genuine Honda parts. Year-specific references describe alternatives for their stated years, not additional supplied parts.
Model-specific OEM replacements: These two bolts are selected for the original SC44 bar-end assemblies, with fitting dimensions matched to Honda’s retaining bolts. They are aftermarket replacements, not genuine Honda parts. This kit is for the original bar-end arrangement, not a universal fit for aftermarket weights.
Head style and materials: The bolts are A2 (304) stainless steel. Their head appearance may differ from the original Honda bolts.
When should you replace these fixings?
- Scuffed or corroded heads: The exposed ends can show wear after years of use.
- Rounded recesses: Worn heads make removing the weights harder.
- A loose bar end: Inspect the weight and internal retaining parts before assuming the bolt is the only fault.
Fitting advice
Follow Honda’s instructions for the bar-end assembly and any specified thread treatment. Start each bolt by hand and make sure the weight seats correctly. Our guide to protecting aluminium mounting threads offers general fitting background. On the throttle side, check that the grip rotates freely and returns properly after tightening; do not ride if the bar end restricts its movement.
Customer questions
Are the handlebar weights supplied?
No. This kit supplies the external retaining bolts and the separate anti-seize pack. Existing weights and internal mountings must be sound.
Where should I use the anti-seize compound?
Use it only where the relevant motorcycle or component instructions specify a suitable thread treatment. Inclusion of the pack is not an instruction to lubricate every fixing.
For general background, read our threadlocker vs anti seize motorcycle bolts guide. Honda’s exact workshop procedure takes precedence.

















Reviews
There are no reviews yet.