Brake, clutch and switchgear bolts for Honda CBR954RR SC50
This eight-piece kit renews the original handlebar-control fixings on the Honda CBR900RR CBR954RR SC50 2002–2003. It serves the front brake master-cylinder clamp, clutch-lever bracket and left and right switchgear housings. These are separate positions; the supplied bolts are not interchangeable.
What you receive
- 2x A2 (304) stainless steel bolts for the front brake master-cylinder handlebar clamp.
- 1x A2 (304) stainless steel bolt for the clutch-lever bracket.
- 5x A2 (304) stainless steel switchgear bolts for the left and right handlebar housings.
- 1x Biker Bling anti-seize compound pack (7 g).
The kit contains fixings only. The controls, lever pivots, brake-hose bolts and clip-on-to-fork clamp bolts are not included.
Original Honda fixing references
| Fitting position / component | Supplied quantity | Original Honda fixing reference |
|---|---|---|
| Front brake master-cylinder holder | 2x | 96001-06022-07 |
| Clutch-lever bracket | 1x | 90126-MCJ-750 |
| Switchgear housing, first fixing group | 2x | 93500-05020-0A |
| Switchgear housing, second fixing group | 1x | 93892-05020-07 |
| Switchgear housing, third fixing group | 2x | 93892-05025-07 |
These numbers identify the original Honda fixing positions, not Biker Bling product codes. The supplied kit contains aftermarket replacements, not genuine Honda parts. Year-specific references describe alternatives for their stated years, not additional supplied parts.
Model-specific OEM replacements: The replacement bolts are selected for the Honda SC50 control fixing positions, with their critical fitting dimensions matched to the original Honda hardware for those locations. They are aftermarket parts, not genuine Honda-branded components.
Head style and materials: All eight supplied fasteners are A2 (304) stainless steel. Head styles may differ from the original Honda fixings, so fit each one only in its intended position.
When should you replace these control fixings?
- Renew bolts with rounded drive recesses, corrosion or damaged threads.
- Inspect the fasteners when removing switch housings or servicing the controls.
- If a control moves or will not clamp securely, check its bracket, locating surfaces and threads as well as the bolts.
New fasteners cannot repair a cracked switch housing, damaged bracket or stripped thread.
Fitting the handlebar controls
Follow Honda’s workshop procedure for each separate control, including alignment and the specified tightening sequence and torque. Keep wiring clear and do not force a bolt into a misaligned housing. Our guide to protecting aluminium mounting threads offers general care advice; Honda’s procedure takes precedence.
Before riding, check brake and clutch lever operation, throttle return, switch functions and cable clearance through full steering movement. If a control cannot be secured or operates incorrectly, have it inspected before riding.
Customer questions
Are lever pivot or banjo bolts included?
No. This kit covers the listed control holders and switchgear housing fixings, not the lever pivots or hydraulic connections.
Where should I use the anti-seize compound?
Use it only where the relevant motorcycle or component instructions specify a suitable thread treatment. Inclusion of the pack is not an instruction to lubricate every fixing.


















Reviews
There are no reviews yet.