Footrest Hanger / Footpeg Bracket and Heel Plate Bolt Kit for Daytona T595

12x stainless steel bolts for the listed rider and pillion footrest hanger and heel-plate mounting positions. The table separates the supplied hardware by location. Designed for the Triumph Daytona T595 1996–1999.

What you receive

• 12x stainless steel bolts for the positions listed below.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Important fitment notes

• For Triumph Daytona T595 1996–1999 with the original rider and pillion footrest hanger and heel-plate mountings shown in the listing drawings.
• Check the exact motorcycle and original components before fitting. Modified or aftermarket assemblies may require different hardware.
• Footrests, hangers, heel plates, footrest pivots, master cylinder, brake hoses and other brake components are not included.
• The contents tables define the supplied hardware. Photographs illustrate the hardware style and fitting positions and may be generic.

Model-specific aftermarket replacements

Biker Bling selects these replacement components for the listed original fixing positions. The Triumph references identify original components, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.

Materials and appearance: The supplied metal replacement fasteners are stainless steel. Their appearance may differ from the original Triumph hardware. Stainless material alone does not establish equivalent mechanical strength.

When should you replace these fixings?

• Corroded or damaged hardware: Inspect worn heads, damaged threads and supporting parts at the listed fixing positions.
• Missing fixings: Restore the correct mounting arrangement with suitable replacement hardware.
• Component servicing: Check the surrounding mounting points before reassembly.

Replacement hardware cannot repair cracked components, stripped threads or damaged mounting faces. Identify the cause of looseness or leakage before refitting.

Fitting information

These mountings support the rider and passenger. Follow Triumph’s procedure for the required fastener specification, bracket positioning, supporting hardware, tightening and thread condition. Align mounting faces before starting bolts by hand; do not pull a misaligned bracket into place with a bolt. Apply compounds only where specified. Where the rear brake master-cylinder mounting is disturbed, check its security, pedal movement and normal brake operation. Confirm all brackets are secure before riding and have damaged or uncertain mountings checked by a qualified motorcycle technician.

For general guidance, read our motorcycle bolt strength grades guide. Triumph’s workshop procedure takes precedence.

Customer questions

Does the kit include the footrests themselves?

No. It supplies only the hanger, heel-plate and related mounting hardware itemised in the contents table, plus one anti-seize compound pack (7 g).

Is a shared heel-plate and master-cylinder fixing counted twice?

No. Where a row describes a shared mounting position, its stated quantity is supplied once, not once for each component it retains.