Windscreen Bolt Kit with Rubber Well Nuts for Daytona T595

8x stainless steel windscreen bolts, 8x supporting washers and 8x rubber well nuts for the original screen-to-nose-cone fixing positions. Designed for the Triumph Daytona T595 1996–1999.

What you receive

• 8x stainless steel bolts for the positions listed below.
• 8x washers for the positions listed below.
• 8x rubber well nuts for the positions listed below.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Important fitment notes

• For Triumph Daytona T595 1996–1999 with the original windscreen mounting positions shown in the listing drawings.
• Check the exact motorcycle and original components before fitting. Modified or aftermarket assemblies may require different hardware.
• The windscreen, nose cone, fairing panels and other bodywork hardware are not included.
• The contents tables define the supplied hardware. Photographs illustrate the hardware style and fitting positions and may be generic.

Model-specific aftermarket replacements

Biker Bling selects these replacement components for the listed original fixing positions. The Triumph references identify original components, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.

Materials and appearance: The supplied bolts are stainless steel; the well nuts are rubber with threaded inserts. Their appearance may differ from the original Triumph hardware. Stainless material alone does not establish equivalent mechanical strength.

When should you replace these fixings?

• Corroded or damaged hardware: Inspect worn heads, damaged threads and supporting parts at the listed fixing positions.
• Missing fixings: Restore the correct mounting arrangement with suitable replacement hardware.
• Component servicing: Check the surrounding mounting points before reassembly.

Replacement hardware cannot repair cracked components, stripped threads or damaged mounting faces. Identify the cause of looseness or leakage before refitting.

Fitting information

Check the screen and nose-cone mounting holes are aligned and undamaged. Fit the rubber well nuts and supporting washers in their intended positions. Follow Triumph’s screen fitting procedure and avoid overtightening or stressing the plastic. Apply compounds only where appropriate; the included pack is not an instruction to coat rubber fittings. Check the screen is secure before use.

For general guidance, read our guide to fitting motorcycle fairing bolts without damaging plastic panels. Triumph’s workshop procedure takes precedence.

Customer questions

Are rubber well nuts included?

Yes. The kit supplies one rubber well nut and one supporting washer for each listed windscreen bolt, plus one anti-seize compound pack (7 g).

Does this replace the complete fairing hardware?

No. This kit covers the listed windscreen fixing positions only.