Top and Bottom Yoke / Triple-Clamp Pinch Bolt Kit for Daytona 650

6x stainless steel replacement fork-clamping bolts for the original steering yokes: 2x for the top yoke and 4x for the bottom yoke. Designed for the Triumph Daytona 650 2005.

What you receive

• 6x stainless steel bolts for the positions listed below.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Important fitment notes

• For Triumph Daytona 650 2005 with the original upper and lower steering-yoke fork clamps shown in the listing drawings.
• Check the exact motorcycle and original components before fitting. Modified or aftermarket assemblies may require different hardware.
• Yokes, forks, steering stem nuts, handlebars, handlebar clamp bolts and front axle pinch bolts are not included.
• The contents tables define the supplied hardware. Photographs illustrate the hardware style and fitting positions and may be generic.

Model-specific aftermarket replacements

Biker Bling selects these replacement components for the listed original fixing positions. The Triumph references identify original components, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.

Materials and appearance: The supplied metal replacement fasteners are stainless steel. Their appearance may differ from the original Triumph hardware. Stainless material alone does not establish equivalent mechanical strength.

When should you replace these fixings?

• Corroded or damaged hardware: Inspect worn heads, damaged threads and supporting parts at the listed fixing positions.
• Missing fixings: Restore the correct mounting arrangement with suitable replacement hardware.
• Component servicing: Check the surrounding mounting points before reassembly.

Replacement hardware cannot repair cracked components, stripped threads or damaged mounting faces. Identify the cause of looseness or leakage before refitting.

Fitting information

These bolts clamp the fork legs within the steering yokes. Follow Triumph’s procedure for fork position, fastener specification, tightening order, torque and thread condition at each yoke. Match top and bottom bolt groups to their intended positions; do not assume the same tightening procedure applies to both. Do not pull a misaligned fork or clamp into place with a bolt. Use compounds only where specified. Check alignment, secure assembly and free steering movement before riding. Have damaged or uncertain mountings checked by a qualified motorcycle technician.

For general guidance, read our motorcycle bolt strength grades guide. Triumph’s workshop procedure takes precedence.

Customer questions

Are handlebar clamp bolts included?

No. This kit contains 2x top-yoke and 4x bottom-yoke pinch bolts, plus one anti-seize compound pack (7 g). Handlebar and axle clamp bolts are separate.

Can all six bolts be treated as interchangeable?

Match each bolt to its listed original position and follow the workshop procedure for that clamp. A shared reference does not establish a shared tightening procedure.