Model-Specific Fairing Bolt Kit for Triumph Daytona 650 2005

This model-specific kit includes 67x shouldered and non-shouldered stainless steel fairing bolts selected for the listed original fixing positions on the Triumph Daytona 650 2005. Includes 4x mirror mounting nuts and protective anti-scratch washers, with the hardware bagged and labelled by fitting area. Browse the Triumph Daytona 650 2005 fastener range.

What you receive

• 67x stainless steel motorcycle fairing and bodywork bolts, allocated by fitting area below.
• 4x stainless steel mirror mounting nuts.
• Protective anti-scratch washers for the supplied fixing groups.
• 1x Biker Bling anti-seize compound pack (7 g).

Windscreen

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Windscreen	6x	Non-shouldered bolt	T3330635

Mirror mounting nuts

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Mirror mounting nuts	4x	Nut	T3350012

Infill panels

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Infill panels	4x	Non-shouldered bolt	T3330941

Air intakes

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Air intakes	2x	Non-shouldered bolt	T3330941

Nose cone

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Nose cone	6x	Shouldered bolt	T3331063

Front fairing and mounting brackets

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Front fairing and mounting brackets	13x	Shouldered bolt	T3331063
Front fairing and mounting brackets	8x	Non-shouldered bolt	T3330941
Front fairing and mounting brackets	6x	Shouldered bolt	T3330848
Front fairing and mounting brackets	2x	Non-shouldered bolt	T3205063
Front fairing and mounting brackets	2x	Non-shouldered bolt	T3200903

Rear fairing

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Rear fairing	4x	Non-shouldered bolt	T3330941
Rear fairing	2x	Non-shouldered bolt	T3010707
Rear fairing	2x	Non-shouldered bolt	T3050334

Front mudguard

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Front mudguard	4x	Shouldered bolt	T3330848

Rear hugger / mudguard

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Rear hugger / mudguard	3x	Shouldered bolt	T3331517
Rear hugger / mudguard	1x	Non-shouldered bolt	T3330749

Chain guard

Fitting position / component	Supplied quantity	Bolt profile / hardware	Original Triumph fixing reference
Chain guard	2x	Non-shouldered bolt	T3330727

Total supplied: 67x bolts and 4x mirror nuts, plus the protective washers and anti-seize pack. Repeated references belong to the separate fitting areas shown; they are not alternative quantities.

Why choose a model-specific fairing bolt kit?

When comparing motorcycle fairing fasteners, check the shoulder profile, fitting position and supplied hardware as well as the thread. This kit identifies the shouldered and non-shouldered groups by location and original Triumph reference. A thread match alone does not establish that a bolt is suitable for a stepped panel mounting. Read our generic vs model-specific motorcycle bolt kit guide for the points to compare.

Important fitment notes

• Compatibility: For Triumph Daytona 650 2005 with the matching original bodywork and mounting arrangement listed above.
• Check before fitting: Aftermarket fairings, screens, brackets or modified mounting points may require different hardware.
• Aftermarket parts: These are stainless steel replacements, not genuine Triumph-branded components. The references identify the original fixing positions; replacement head appearance may differ.
• Exclusions: Body panels, windscreen, mirrors, mudguards, chain guard and their supporting assemblies are not supplied.
• Contents and photographs: Photographs may include generic hardware illustrations. Use the contents tables for the supplied allocation.

When should you replace fairing bolts?

• Missing or damaged bolts: Match the replacement to the correct mounting area and original reference.
• Rounded heads or damaged threads: Inspect the panel mounts and supporting components before reassembly.
• Bodywork servicing: Keep the labelled fixing groups separate when removing panels.

Replacement bolts cannot repair cracked fairing tabs, stripped threads or distorted brackets. Check the surrounding mounting before treating a loose panel as a bolt-only problem.

Fitting information

• Correct group: Match the shouldered and non-shouldered bolts to their listed locations. Use the supplied protective washers where appropriate to the original mounting arrangement.
• Alignment: Align the panels and start the bolts by hand. Do not force a misaligned fairing into position with a bolt.
• Tightening: Follow Triumph’s procedure for the exact fixing and thread condition. A shoulder is not permission to tighten without the specified limit.
• Fitting compounds: The included anti-seize pack is not an instruction to lubricate every fixing.

For general fitting background, read our motorcycle fairing bolt fitting guide. Check all disturbed bodywork and wheel clearances before riding.

Customer questions

Does this kit include shouldered bolts?

Yes. The tables identify each shouldered and non-shouldered group, together with its fitting area, quantity and original reference.

Why is matching the thread alone not enough?

The shoulder profile and mounting arrangement also matter. Use the correct group at each position rather than treating all fairing bolts as interchangeable.

Is this only a front fairing kit?

No. It covers all the fitting areas in the tables, including the listed screen, mirror, rear fairing, mudguard, hugger and chain-guard fixings.