Bar-End / Handlebar End Weight Bolt Kit for Daytona 675R

2x stainless steel replacement bolts retaining the original external handlebar end weights, with 1x fixing for each side. Also described as bar-end retaining bolts, they secure the weights rather than the handlebars themselves. Designed for the Triumph Daytona 675R 2013–2016.

What you receive

• 2x stainless steel bolts for the positions listed below.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Important fitment notes

• For Triumph Daytona 675R 2013–2016 with the original external handlebar end weight mountings shown in the listing drawings.
• Check the exact motorcycle and original components before fitting. Modified or aftermarket assemblies may require different hardware.
• Bar-end weights, internal mounting assemblies, rubbers, retaining parts, handguards and mirrors are not included. These are not handlebar clamp or steering-yoke bolts.
• The contents tables define the supplied hardware. Photographs illustrate the hardware style and fitting positions and may be generic.

Model-specific aftermarket replacements

Biker Bling selects these replacement components for the listed original fixing positions. The Triumph references identify original components, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.

Materials and appearance: The supplied metal replacement fasteners are stainless steel. Their appearance may differ from the original Triumph hardware. Stainless material alone does not establish equivalent mechanical strength.

When should you replace these fixings?

• Corroded or marked heads: Inspect the bolts when a weight is removed.
• Worn drive recesses or threads: Check the retaining arrangement before refitting.
• Missing hardware: Make sure each weight and its internal mounting parts are complete.

A loose weight can also indicate worn or damaged internal mounting parts. New bolts alone may not resolve that fault.

Fitting information

Match each replacement to its original side and follow Triumph’s tightening and thread-treatment instructions. Use anti-seize or threadlocker only where specified. Confirm both weights are secure and that the right-hand weight does not restrict throttle movement or its return throughout steering movement. Aftermarket mirrors, handguards or replacement weights may need different hardware.

For general guidance, read our guide to threadlocker and anti-seize on motorcycle bolts. Triumph’s workshop procedure takes precedence.

Customer questions

Are the bar-end weights supplied?

No. This kit includes 2x replacement bolts and one anti-seize compound pack (7 g). Weights and internal mounting parts are separate.

Will these fit aftermarket bar-end mirrors?

Check the mirror manufacturer’s fitting arrangement. A mirror using its own expansion fitting or replacement weight may need different bolts.