Honda CBR1100XX Blackbird 1999–2007 Stainless Steel Fairing Bolt Kit — 7x 90112-MAT-000
£20.00
7x stainless steel shoulder fairing bolts with OEM-matching 22 mm dimpled heads: 5x front fairing and 2x rear fairing. For Honda CBR1100XX Blackbird 1999–2007. Panels, washers, clips and other fairing bolt types are not included.
Also included: 1x Biker Bling anti-seize compound pack (7 g).
Free UK delivery for orders sent to a UK address.
Returns: UK consumers buying online can normally cancel within 14 days of receiving goods and return them within a further 14 days. Read our returns policy.
Stainless Steel Fairing Bolt Kit — 7x 90112-MAT-000 for Honda CBR1100XX Blackbird
7x stainless steel shoulder fairing bolts with OEM-matching 22 mm dimpled heads: 5x front fairing and 2x rear fairing. For the original mounting arrangement on the Honda CBR1100XX Blackbird 1999–2007.
Close OEM-style fit and appearance
The shoulder length and diameter, head size and Allen-key fitting match the original Honda fixing. The 22 mm head retains the original broad-head appearance, including the dimple detail.
These are Biker Bling aftermarket replacements, not genuine Honda-branded parts. Honda references identify the original components being replaced.
What you receive
- 5x front fairing shoulder bolts — replacement for 90112-MAT-000.
- 2x rear fairing shoulder bolts — replacement for 90112-MAT-000.
- 1x Biker Bling anti-seize compound pack (7 g).
Original Honda fixing references
| Fitting position / component | Kit quantity | Honda reference |
|---|---|---|
| Front fairing shoulder bolts | 5x | 90112-MAT-000 |
| Rear fairing shoulder bolts | 2x | 90112-MAT-000 |
Important fitment notes
- For Honda CBR1100XX Blackbird 1999–2007 with the original components at the listed positions.
- Check the original reference and fitting arrangement, especially with aftermarket screens, panels or modified components.
- Panels, washers, clips and other fairing bolt types are not included.
When should you replace these fixings?
Inspect fixings when removing the relevant component. Replace missing hardware or damaged heads, threads, clips or rubber fittings with the correct type. New fixings cannot repair cracked panels, enlarged holes or damaged mounting threads.
Fitting information
Match each fixing to its intended position and start threaded fasteners by hand. Align the components before tightening; do not use a bolt to pull a misaligned panel into place. Follow Honda’s instructions and avoid overtightening plastic or rubber mountings. Use anti-seize only where the applicable procedure permits it. Check the fitted components are properly seated and secure.
For general background, read our guide to fitting motorcycle fairing bolts. Honda’s workshop procedure takes precedence.
Customer questions
What distinguishes these from a generic fairing bolt?
The original shoulder length and diameter, 22 mm head diameter, Allen-key fitting and dimpled head-face detail are matched to the referenced Honda fixing.
| Weight | 85 g |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.