Model-specific shouldered fairing bolt kit for Honda CBR125R

This model-specific kit includes shouldered and non-shouldered stainless steel fairing bolts selected to replace the original Honda fixings at their intended mounting positions on the Honda CBR125R 2007–2010. Nylon washers are supplied for the non-shouldered bolts. The hardware is bagged and labelled by fitting area.

Why choose a model-specific shouldered fairing bolt kit?

When comparing motorcycle fairing fasteners for the Honda CBR125R 2007–2010, check shoulder profiles, head styles, fitting locations and the supplied hardware—not just thread size or bolt count. This model-specific stainless steel motorcycle fairing bolt kit includes shouldered and non-shouldered bodywork bolts, with nylon washers for the non-shouldered bolts. Quantities and Honda references are grouped by fitting area, and the hardware is bagged and labelled by location.

Read our guide to generic vs model-specific motorcycle fairing bolt kits for the differences to check.

What you receive

• 12x stainless steel self-tapping fasteners.
• 38x stainless steel replacement bolts: 24x shouldered and 14x non-shouldered.
• 14x nylon washers — one for each non-shouldered bolt. Shoulder bolts do not require washers.
• 1x Biker Bling anti-seize compound pack (7 g).

The fasteners are bagged and labelled by fitting area. The tables below identify the replacement components and the original Honda fixing references for those positions. Honda references are cross-references, not Biker Bling product codes or genuine Honda parts supplied in this kit.

Windscreen

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Windscreen — self-tapping fasteners	2x	Self-tapping fastener	93903-24220

Nose cone

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Nose cone — bolts	2x	Shouldered bolt	90115-KPP-900

Infill panels

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Infill panels — bolts	4x	Shouldered bolt	90115-KPP-860

Tank cover

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Tank cover — bolts	4x	Shouldered bolt	90114-MG9-770

Side fairing

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Side fairing — bolts	7x	Shouldered bolt	90115-KPP-900
Side fairing — bolts	4x	Non-shouldered bolt	90107-KPH-970
Side fairing — bolts	1x	Shouldered bolt	90103-KTY-D30
Side fairing — self-tapping fasteners	2x	Self-tapping fastener	93903-24320
Side fairing — self-tapping fasteners	4x	Self-tapping fastener	93903-24220
Side fairing — bolts	2x	Shouldered bolt	90139-MCA-000

Rear fairing

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Rear fairing — bolts	2x	Non-shouldered bolt	90107-KPH-970
Rear fairing — bolts	2x	Non-shouldered bolt	90116-KPP-900
Rear fairing — bolts	2x	Shouldered bolt	90115-KPP-900
Rear fairing — bolts	2x	Shouldered bolt	91509-GE2-760
Rear fairing — self-tapping fasteners	4x	Self-tapping fastener	93903-24320

Front mudguard

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Front mudguard — bolts	2x	Non-shouldered bolt	96001-06022-00
Front mudguard — bolts	2x	Non-shouldered bolt	96001-06035-00

Chain guard

Fitting position / component	Supplied quantity	Component type	Original Honda fixing reference
Chain guard — bolts	1x	Non-shouldered bolt	95701-06012-07
Chain guard — bolts	1x	Non-shouldered bolt	95701-06016-07

Important fitment notes

• Compatibility: For the listed original bodywork fixing positions on the Honda CBR125R 2007–2010. Check altered brackets and aftermarket panels before fitting.
• Materials: Replacement bolts and self-tapping fasteners are stainless steel. Rubber well nuts, plastic fittings and nylon washers retain their respective materials; they are not stainless steel.
• Head style: Replacement heads may differ from Honda’s originals. Use the labelled hardware for its intended position rather than treating every bolt as interchangeable.
• Kit scope: The supplied fixing positions are itemised above. Body panels, screens, mirrors, mudguards and motorcycle assemblies are not included.

When should you replace fairing fixings?

• Damaged heads or threads: Renew hardware that cannot be removed or tightened correctly.
• Missing or worn fittings: Check the panel mounting point and its supporting hardware before selecting a replacement.
• During bodywork servicing: Inspect fasteners and plastic mounting tabs when panels are removed.

Replacement hardware cannot repair cracked panels, broken tabs or stripped mounting points. Inspect a loose or rattling panel to identify the cause.

Fitting the fairing bolt kit

Support each panel, align the mounting holes and start threaded fasteners by hand. Match each labelled bag to the relevant fitting area and follow Honda’s instructions for the original assembly. Avoid overtightening plastic panels or using a bolt to pull misaligned parts together. Use anti-seize only where appropriate and in accordance with the applicable fitting instructions.

Read our guide to fitting motorcycle fairing bolts without damaging plastic panels for general guidance.

Customer questions

Is this a genuine Honda bolt kit?

No. It contains aftermarket replacement hardware selected for the listed fitting positions. The Honda numbers identify the original components.

Will it fit aftermarket fairings?

Check the panel manufacturer’s mounting requirements. Replacement panels or brackets may need a different fixing arrangement.

Does this kit include shouldered fairing bolts for the CBR125R?

Yes. It includes 24x shouldered bolts for the positions identified in the tables, alongside 14x non-shouldered bolts for their listed locations on the Honda CBR125R 2007–2010.

Are nylon washers supplied for every bolt?

This kit includes 14x nylon washers for the non-shouldered bolts. The shouldered bolts do not require additional nylon washers in this kit.

What should I compare with a universal fairing bolt assortment?

Check the shoulder profile, head style, intended mounting position and associated fittings. Matching a thread alone does not establish that a bolt suits the original panel mounting arrangement. This kit identifies its supplied hardware by location and original Honda reference.