Footrest Hanger Bolt Kit for Honda CBF125

This kit covers the original rider and pillion footrest mounting fasteners listed below. It is for the bracket-to-frame positions, not footpeg pivots or rubber-pad bolts. Browse the matching Honda CBF125 2009–2013 fastener range.

What you receive

• 6x stainless steel footrest hanger-to-frame mounting bolts.
• 1x Biker Bling anti-seize compound pack (7 g).

Photographs illustrate the hardware and may be generic. Use the contents list and fitting positions for the supplied kit.

Important fitment notes

• Compatibility: Listed for Honda CBF125 2009–2013 with the original rider and pillion bracket-to-frame mounts.
• Verify before ordering or fitting: Match the exact year, variant, original components and fixing arrangement. Modified assemblies may require different hardware.
• Aftermarket parts: These are Biker Bling replacement components, not genuine Honda-branded parts.
• Exclusions: Footrests, hangers, heel plates, footpeg pivots, rubber-pad bolts, brake master-cylinder mounting bolts and exhaust hardware are not included.

Model-specific aftermarket replacements: Biker Bling selects the supplied replacements for the mounting positions described here. Match each fixing to its intended position and the exact original arrangement; these are not genuine Honda components.

Original Honda part references

• 95701-10016-08 — original rider footrest mounting bolt.
• 95701-08018-07 — original pillion holder mounting bolt.

These numbers identify original Honda components, not Biker Bling SKUs. Year-specific references are alternatives for their stated positions, not extra supplied parts or proof of an official supersession.

Materials and head style: The fasteners are stainless steel; their head appearance may differ from Honda’s originals. The material name alone does not establish mechanical-strength equivalence.

When should you replace these fixings?

• Corroded or rounded heads: Inspect fasteners during component servicing.
• Damaged threads or missing bolts: Check both the fixing and mounting before reassembly.
• Loose components: Inspect the bracket, clamp and seating rather than assuming a bolt alone will repair the fault.

Replacement bolts cannot repair cracked brackets or clamps, stripped threads or incorrectly seated components.

Fitting information

• Support the motorcycle and affected component securely. Follow Honda’s exact fastener specification, alignment, tightening order and torque for these mounting points.
• Start the correct bolts by hand. Do not use a bolt to pull a misaligned bracket or clamp into place.
• Use the included anti-seize, threadlocker or other compounds only where the specified fitting procedure permits them.
• Before use, confirm the assembly is secure and nearby controls, cables and hoses move normally. For steering or wheel work, check alignment, throttle return and brake operation. Have damaged or uncertain mountings checked by a qualified technician.

For general background, read our motorcycle bolt strength grades guide. Honda’s workshop procedure takes precedence.

Customer questions

Are rubber-pad bolts or footpeg pivots included?

No. The kit covers only the listed bracket-to-frame mounts.

Will it suit aftermarket rearsets?

Check the rearset manufacturer’s mounting requirements. This kit is listed for the original Honda arrangements.