Stainless Steel Chain Adjuster Bolt kit for CBR600F1 Hurricane

Replacement stainless steel chain adjuster bolts and nuts for the original left and right rear-axle adjustment positions on Honda CBR600F1 Hurricane 1987–1990. The adjusters help position the rear axle for chain adjustment; they do not replace the axle, swingarm pivot or chain itself.

What you receive

• 2x A2 (304) stainless steel chain adjuster bolts – 1x per side.
• 4x A2 (304) stainless steel matching adjuster nuts.
• 1x Biker Bling anti-seize compound pack (7 g).

Exclusions: Chain, sprockets, rear axle, swingarm and complete axle adjuster assemblies are not included. Check modified swingarms or replacement adjuster blocks against their own requirements.

Important fitment notes

• Compatibility: For Honda CBR600F1 Hurricane 1987–1990 with the original component arrangement described above. Check aftermarket or modified components before ordering.
• Aftermarket parts: These are aftermarket replacements, not genuine Honda-branded components.
• Product photographs: Generic photographs illustrate the supplied style. Use the contents list for this kit’s scope.

Material and head style: The replacement fasteners are stainless steel and their heads may differ from Honda’s originals. Material alone does not establish the mechanical strength required for a mounting position.

Original Honda part references

• 94001-08000-0S – original adjuster nut (2 used).
• 94030-08000 – original adjuster locknut (2 used).

These Honda references identify the original mounting components. The supplied parts are aftermarket replacements, not genuine Honda parts. Match the correct fixing to its original position; alternative year references do not mean additional bolts are supplied.

When should you replace these fixings?

• Seized or rounded adjuster heads: Damaged hardware can make chain adjustment difficult.
• Damaged threads or nuts: Inspect the adjuster, locknuts and contact faces before reassembly.
• Chain servicing: Check both adjusters when setting chain slack and rear wheel alignment.

Fitting information

• Support the motorcycle and follow Honda’s chain-slack and wheel-alignment procedure for the exact model.
• Adjust both sides as specified and secure the axle and adjuster nuts in Honda’s required order. The adjuster bolts do not replace the axle clamping procedure.
• Use fitting compounds only where appropriate to the specified thread condition. Check alignment and chain movement after tightening.

For general background, read our stainless steel motorcycle bolt fitting guide. Honda’s workshop procedure takes precedence.

Customer questions

Are the rear axle or adjuster blocks included?

No. This kit supplies the adjuster bolts, matching nuts and anti-seize pack only.

Can these bolts correct a worn chain or sprocket?

No. Inspect the chain and sprockets separately. Follow Honda’s wear limits and adjustment requirements.