Stainless Steel Rear Brake Reservoir Cap Bolt kit for CBR600F3
Check the reservoir fitted to your Honda CBR600F3 1995–1998 before ordering. Honda’s original rear brake reservoir uses a threaded lid without separate cap bolts. This listing must not be selected as a direct replacement for that original cap.
What you receive
- Stainless steel rear reservoir cap bolts for a compatible bolt-retained replacement lid.
- 1x Biker Bling anti-seize compound pack (7 g).
| Fitting position | Quantity |
|---|---|
| Rear reservoir lid | Confirm that the fitted replacement cap uses bolt fixings |
Fitment check required: These bolts require a compatible replacement reservoir cap with bolt fixings. Confirm the cap and supplied bolt specification before purchase. The original Honda threaded cap does not use this kit.
Important fitment notes
- Compatibility: Check the fitted replacement reservoir and cap before ordering. The original Honda rear lid is threaded and is not secured by cap bolts.
- Aftermarket parts: These are aftermarket replacements, not genuine Honda-branded components.
- Product photographs: Generic photographs illustrate the supplied style. Use the contents list for this kit’s scope.
Original Honda part references
- 43513-MY1-006 – Honda’s original threaded rear reservoir cap, not a supplied bolt or a bolt replacement reference.
This cap reference is provided to identify the original Honda assembly. It is not a replacement-bolt part number and does not establish fitment of this kit to that threaded lid.
Supplied bolt material: A2 (304) stainless steel. The material grade alone does not establish mechanical-strength equivalence to Honda’s original hardware.
When should you replace these fixings?
- Rounded or corroded heads: Worn drive recesses can make reservoir access difficult.
- Missing or damaged bolts: Inspect the lid and threaded holes before fitting replacements.
- Fluid servicing: Check the cap, diaphragm and fixings whenever the reservoir is opened.
Fitting information
- Keep dirt, moisture and fitting compounds out of the open reservoir. Protect paintwork from brake-fluid spills.
- Seat the cap and diaphragm correctly, then follow Honda’s closing and tightening procedure. Do not guess a torque or use extra tightening to correct a leak.
- The included anti-seize pack is not an instruction to lubricate reservoir cap bolts. Use compounds only where the relevant instructions specify them.
- Check that the cap is properly seated and secure, with no leakage. Have damaged or contaminated hydraulic components checked before riding.
For general background, read our stainless steel motorcycle bolt fitting guide. Honda’s workshop procedure takes precedence.
Customer questions
Does the original Honda rear reservoir use cap bolts?
No. Honda’s parts diagram shows a threaded rear reservoir lid. Confirm the actual reservoir and lid fitted to the motorcycle before choosing this product.
Are the reservoir and cap included?
No. Hydraulic components, lids and diaphragms are not supplied.

















Reviews
There are no reviews yet.