Top and bottom yoke pinch bolts for Honda VFR1200F
This six-bolt kit is for the fork-clamping positions in the upper and lower steering yokes on the Honda VFR1200F 2011–2013. It supplies 2x top-yoke bolts and 4x bottom-yoke bolts. The separate handlebar-to-fork clamp bolts are not included.
What you receive
- 2x A2 (304) stainless steel top-yoke pinch bolts — 1x per side.
- 4x A2 (304) stainless steel bottom-yoke pinch bolts — 2x per side.
- 1x Biker Bling anti-seize compound pack (7 g).
| Fitting position | Bolt quantity |
|---|---|
| Top yoke / upper fork bridge | 2x |
| Bottom yoke / lower fork bridge | 4x |
| Total supplied | 6x |
Important fitment notes
- Compatibility: For Honda VFR1200F model years 2011, 2012 and 2013 with the original upper and lower fork yokes.
- Verify before installing: Check the exact model, yokes and fixing positions. Replacement yokes, fork conversions or modified clamping arrangements may require different hardware.
- Aftermarket parts: These are aftermarket replacement fasteners, not genuine Honda-branded components.
- Exclusions: Yokes, forks, handlebars, steering stem nuts, handlebar clamp bolts and front axle pinch bolts are not included.
Original Honda fixing references
| Fitting position / component | Supplied quantity | Original Honda fixing reference |
|---|---|---|
| Top yoke / upper fork bridge | 2x | 90108-MR7-000 |
| Bottom yoke / lower fork bridge | 4x | 90109-MR7-000 |
These numbers identify the original Honda fixing positions, not Biker Bling product codes. The supplied kit contains aftermarket replacements, not genuine Honda parts. Year-specific references describe alternatives for their stated years, not additional supplied parts.
Model-specific aftermarket replacements: Biker Bling selects the aftermarket bolts for the original upper and lower steering-yoke fork-clamping positions. Match the top and bottom bolts to their intended locations rather than treating all six as interchangeable.
Head style and materials: The supplied bolts are A2 (304) stainless steel. Their head appearance may differ from Honda’s originals. Stainless steel describes the material; it does not by itself establish equivalent mechanical strength.
When should you replace yoke pinch bolts?
- Corroded or rounded heads: Inspect damaged fixings that are difficult to remove or refit.
- Damaged threads or missing bolts: Check the bolt and yoke threads; new bolts do not repair stripped mountings.
- During fork servicing: Inspect the clamping points and fixings whenever the forks are removed.
New bolts cannot repair cracked clamps, damaged yokes, stripped threads or incorrectly seated fork components.
Fitting the top and bottom yoke pinch bolts
- These bolts secure the fork legs within the steering yokes. Follow Honda’s workshop procedure for fork position, fastener specification, tightening order and torque at each yoke.
- Do not assume that the upper and lower positions use the same specification. Start the correct fasteners by hand and do not pull a misaligned assembly into place with a bolt.
- Follow the specified thread condition and use fitting compounds only where required. The anti-seize pack is not an instruction to lubricate every steering fastener.
- Before riding, confirm the forks and front wheel are correctly aligned and the steering moves freely without cables or hoses snagging. Have damaged or uncertain mountings inspected by a qualified motorcycle technician.
For general background, read our motorcycle bolt strength grades guide. Honda’s workshop procedure takes precedence.
Customer questions
Are the handlebar clamp bolts included?
No. This kit supplies 6x yoke bolts: 2x for the top yoke and 4x for the bottom yoke, plus 1x anti-seize pack (7 g). Handlebar-to-fork clamp bolts are separate.






















Reviews
There are no reviews yet.