Brake and clutch banjo bolt kit for Honda VFR1200F
This kit supplies replacement banjo bolts and copper sealing washers for seven brake and clutch hydraulic connections on the Honda VFR1200F 2011–2013.
It covers the listed master cylinder, clutch slave cylinder and brake calliper connections. The hollow banjo bolts secure the hydraulic hose fittings while allowing fluid to pass through the connections.
What you receive
- 7x stainless steel banjo bolts.
- 14x copper sealing washers.
- 1x Biker Bling anti-seize compound pack (7 g).
Original Honda fixing references
| Fitting position / component | Supplied quantity | Original Honda fixing reference |
|---|---|---|
| Front brake master-cylinder connection | 1x | 90145-MS9-612 |
| Clutch master-cylinder connection | 1x | 90145-MS9-612 |
| Clutch slave-cylinder connection | 1x | 90145-MS9-612 |
| Front brake calliper connections | 2x | 90145-MS9-612 |
| Rear brake master-cylinder connection | 1x | 90145-MS9-612 |
| Rear brake calliper connection | 1x | 90145-MS9-612 |
| Copper sealing washers | 14x | 90545-300-000 |
The numbers identify original Honda components; the supplied parts are aftermarket replacements, not genuine Honda hardware.
The seven bolts are supplied for these fitting positions:
| Fitting position | Bolt quantity |
|---|---|
| Front brake master cylinder | 1x |
| Clutch master cylinder | 1x |
| Clutch slave cylinder | 1x |
| Front brake callipers | 2x |
| Rear brake master cylinder | 1x |
| Rear brake calliper | 1x |
| Total | 7x |
Important fitment notes
- Compatibility: Designed for Honda VFR1200F model years 2011, 2012 and 2013 with the original brake and hydraulic clutch layout described above.
- Verify before installing: Check your motorcycle’s exact model and existing hydraulic connections, especially if aftermarket hoses or modified brake or clutch components are fitted.
- Aftermarket parts: These are aftermarket replacement parts, not genuine Honda-branded components. The banjo bolts are stainless steel and the sealing washers are copper.
- Exclusions: This kit supplies banjo bolts and sealing washers for the seven connections listed above. Brake hoses, master cylinders, clutch slave cylinders, callipers, calliper mounting bolts and calliper joining bolts are not included.
When should you replace banjo bolts and sealing washers?
Reasons to inspect these connections include corrosion, damaged threads, worn bolt heads or hydraulic servicing that requires a joint to be dismantled.
A leaking connection needs its cause investigated. Damaged hose fittings, sealing faces or hydraulic components may also require attention; replacement bolts alone may not resolve the problem.
Fitting information
Follow Honda’s workshop instructions for the exact motorcycle, including sealing washer placement, tightening, fluid specification and bleeding. Use new, correctly specified sealing washers when reassembling the disturbed connections.
The included anti-seize pack does not mean it should be applied to the banjo bolts. Use compounds only where the motorcycle or component manufacturer specifies them.
After fitting, check the disturbed connections for leaks and confirm correct brake and clutch operation before riding. Have a suitably qualified motorcycle technician carry out the work if you are uncertain.
For further explanation, read our guide to motorcycle banjo bolts and copper sealing washers.
Customer questions
Does this include replacement brake hoses?
No. Only the listed banjo bolts, sealing washers and separate anti-seize pack are supplied.
Where should I use the anti-seize compound?
Use it only where the relevant motorcycle or component instructions specify a suitable thread treatment. Inclusion of the pack is not an instruction to lubricate every fixing.


















Reviews
There are no reviews yet.