Fuel Tank Mounting Bolt Kit for Bonneville SE

2x stainless steel replacement bolts for the original fuel tank frame mounting positions shown in the listing drawing. Designed for the Triumph Bonneville SE 2009–2015.

What you receive

• 2x stainless steel bolts for the tank frame mounting positions listed below.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Important fitment notes

• For Triumph Bonneville SE 2009–2015 models with the original fuel tank and associated mountings shown in the listing drawing.
• Check the exact model and original components before installation. Aftermarket or modified assemblies may require different hardware.
• The fuel tank, badges, fuel pump, hoses, mounting rubbers, spacers and other fuel-system components are not included. This EFI kit does not include carburettor fuel-tap or tank-badge fixings.
• Photographs illustrate the hardware and fitting positions. The contents table defines the actual supplied quantities.

Model-specific aftermarket replacements

Biker Bling selects these replacements for the listed original fixing positions. The Triumph references identify the original components replaced, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.

Materials and appearance: The supplied bolts are stainless steel. Their appearance may differ from the originals. Material alone does not establish equivalent mechanical strength.

When should you replace these fixings?

• Damaged mounting bolts: Inspect worn heads or damaged threads when the tank is removed.
• Tank servicing: Check the supporting rubbers, spacers and bracket seating before reassembly.
• Missing fixings: Restore the correct hardware at the listed tank mounting positions.

Replacement bolts cannot repair damaged tank brackets, perished mounting rubbers, stripped threads or a leaking fuel-system component.

Fitting information

Work in a ventilated area away from ignition sources and follow Triumph’s procedure for safely removing and refitting the fuel tank. Support the tank, protect painted surfaces and retain the required mounting rubbers and spacers. Match bolts to the listed positions and follow the specified thread condition and tightening values. Do not use bolts to pull misaligned tank mounts into place. If fuel lines are disconnected, follow the specified connection and leak-check procedure before use. The included anti-seize pack is for use only where appropriate under the fitting instructions. Stop and investigate any fuel leak before riding.

For general guidance, read our stainless steel motorcycle bolt fitting guide. Triumph’s workshop procedure takes precedence.

Customer questions

Are fuel-tap bolts included?

No. This EFI kit covers only the tank mounting positions listed in the table. It does not include carburettor fuel-tap hardware.

Are the tank mounting rubbers and spacers supplied?

No. Reuse sound original supporting parts where Triumph specifies, or replace damaged parts separately.