Rear Shock Absorber Mounting Bolt and Washer Kit for Bonneville & T100

4x stainless steel bolts and 4x stainless steel washers for the original left and right rear shock absorber mounting points. The kit supplies the listed upper and lower mounting hardware for both shocks. Designed for the Triumph Bonneville & T100 2009–2015 (EFI).

What you receive

• 4x stainless steel rear shock absorber mounting bolts.
• 4x stainless steel supporting washers.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Important fitment notes

• For Triumph Bonneville & T100 2009–2015 fuel-injected models with the original rear shock mountings shown in the listing drawing.
• Check the exact model and original components before installation. Aftermarket or modified assemblies may require different hardware.
• Shock absorbers, bushes, sleeves, frame, swingarm and other suspension components are not included.
• Photographs illustrate the hardware and fitting positions. The contents table defines the actual supplied quantities.

Model-specific aftermarket replacements

Biker Bling selects these replacements for the listed original fixing positions. The Triumph references identify the original components replaced, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.

Materials and appearance: The supplied bolts and mounting washers are stainless steel. Their appearance may differ from the originals. Material alone does not establish equivalent mechanical strength.

When should you replace these fixings?

• Corroded or damaged heads: Inspect the fasteners during shock absorber maintenance.
• Worn threads or washers: Check the bolts, supporting washers and mounting threads.
• Shock replacement: Inspect the mounting bushes, sleeves and seating before reassembly.

Replacement bolts cannot repair worn shock bushes, damaged mounting lugs, stripped threads or a bent component.

Fitting information

Support the motorcycle and suspension securely before removing any shock mounting hardware. Follow Triumph’s procedure for removing and refitting each shock, the required fastener specification, washer placement, thread condition and tightening torque. Do not use a bolt to force misaligned mounting points together. Apply thread treatments only where specified and confirm all disturbed mountings are secure before riding. If a mounting or replacement specification is uncertain, have it checked by a qualified motorcycle technician.

For general guidance, read our motorcycle bolt strength grades guide. Triumph’s workshop procedure takes precedence.

Customer questions

Does this kit cover both rear shock absorbers?

Yes. The supplied allocation is 4x mounting bolts and 4x supporting washers for the two original shocks, plus one anti-seize compound pack (7 g).

Are shock bushes or sleeves included?

No. The shock absorbers and their bushes, sleeves and other mounting components are not supplied.