Fairing and bodywork fixing kit for Triumph Sprint GT SE 1050 2013–2017

This model-specific kit brings together 174 fixings across ten fitting areas for the Triumph Sprint GT SE 1050 2013–2017, with the matching original bodywork. Engine capacity: 1050 cc.

One full kit covers the listed screen, infill panels, cockpit, nose cone, front and lower fairings, rear side fairings, rear fairings and undertray, grab rack, front mudguard, chain guard and hugger positions. The original screen-bracket fixing group is excluded.

Stainless steel replacement bolts provide corrosion resistance, although appropriate cleaning and care are still required. Plastic clips, rubber well nuts, captive clips, nuts and nylon washers retain the materials stated in the contents.

Why choose a model-specific Sprint GT SE fairing bolt kit?

This kit is allocated to the original bodywork positions listed below. The contents distinguish shouldered and non-shouldered bolts, component styles, clips, nuts and washer positions by their intended locations and original Triumph references. Keep each group organised by its fitting area and diagram item.

Component styles and fitting details

Hardware photographs are shared illustrations of component styles. They do not define compatibility: the model-specific contents, original references and location diagrams identify the supplied positions. Photographs are not to scale.

Read our guide to generic and model-specific motorcycle bolt kits.

When should you replace bodywork fixings?

Inspect fixings when removing panels or servicing these areas. Replace missing fixings and damaged heads, threads, nuts or clips with the appropriate type. New hardware cannot repair cracked panels, enlarged holes or damaged mounting threads.

What you receive

• 72 replacement bolts.
• 29 captive clips / nuts.
• 10 rubber well nuts.
• 2 flange locknuts.
• 2 plastic push clips.
• 59 nylon washers.

Total: 174 pieces. The allocations below form one full kit.

Model-specific kit contents

Fitting area	Component	Quantity	Original Triumph reference / position	Diagram item
Screen	Small domed head bolts	6x	T3330646	7
Screen	Rubber well nuts	6x	T3350050	3
Screen	Nylon washers	6x	Supplementary supplied washers	+
Infill panels	Fully threaded bolts	8x	T3330941	5
Infill panels	Nylon washers	8x	Supplementary supplied washers	+
Cockpit	Fully threaded bolts	1x	T3332568	12
Cockpit	Captive clips / nuts	6x	T3350123	15
Cockpit	Nylon washers	1x	Supplementary supplied washers	+
Nose cone	Shouldered bolts	6x	T3331063	2
Front and lower fairings	Shouldered bolts	4x	T3331063	17
Front and lower fairings	Fully threaded bolts	6x	T3330941	18
Front and lower fairings	Captive clips / nuts	3x	T3350123	22
Front and lower fairings	Captive clips / nuts	1x	T3350111	25
Front and lower fairings	Captive clips / nuts	13x	T3351052	28
Front and lower fairings	Shouldered bolts	2x	T3331064	32
Front and lower fairings	Nylon washers at original washer positions	2x	T3555023	35
Front and lower fairings	Nylon washers	6x	Supplementary supplied washers	+
Rear side fairings	Fully threaded bolts	2x	T3330943	9
Rear side fairings	Plastic push clips	2x	T3701121	10
Rear side fairings	Nylon washers	2x	Supplementary supplied washers	+
Rear fairings and undertray	Captive clips / nuts	1x	T3351052	3
Rear fairings and undertray	Fully threaded bolts	4x	T3330943	4
Rear fairings and undertray	Fully threaded bolts	2x	T3330941	6
Rear fairings and undertray	Nylon washers at original washer positions	2x	T3555023	9
Rear fairings and undertray	Fully threaded bolts	4x	T3330892	10
Rear fairings and undertray	Fully threaded bolts	6x	T3205066	12
Rear fairings and undertray	Nylon washers at original washer positions	6x	T3555026	13
Rear fairings and undertray	Captive clips / nuts	3x	T3350123	14
Rear fairings and undertray	Nylon washers	8x	Supplementary supplied washers	+
Grab rack	Cap head bolts	2x	T3205653	5
Grab rack	Pan head bolts	4x	T3337777	7
Grab rack	Flanged locknut	2x	T3350004	12
Grab rack	Nylon washers	6x	Supplementary supplied washers	+
Front mudguard	Shouldered bolts	2x	T3331063	3
Front mudguard	Pan head bolts	4x	T3331299	5
Front mudguard	Rubber well nuts	4x	3350060	6
Front mudguard	Captive clips / nuts	2x	T3350123	7
Front mudguard	Nylon washers	4x	Supplementary supplied washers	+
Chain guard and hugger	Small domed head bolts	2x	T3331043	18
Chain guard and hugger	Fully threaded bolts	2x	T3205066	23
Chain guard and hugger	Shouldered bolts	1x	T3331517	31
Chain guard and hugger	Fully threaded bolts	3x	T3205083	32
Chain guard and hugger	Fully threaded bolts	1x	T3330727	34
Chain guard and hugger	Nylon washers	8x	Supplementary supplied washers	+

Original Triumph references identify the fixing or original washer position being replaced. Supplied hardware is aftermarket and is not genuine Triumph-branded stock. For nylon washers at original washer callouts, the reference identifies the position rather than a claim that the original washer was nylon.

Nylon washer allocation

The 59 nylon washers include 6 for the screen, 8 for infill panels, 1 for the cockpit, 8 for front and lower fairings, 2 for rear side fairings, 16 for rear fairings and undertray, 6 for the grab rack, 4 for the front mudguard and 8 for the chain guard and hugger. Original washer callouts are already included and must not be added again. No supplementary nylon washers are allocated to shouldered bolts. A plus sign identifies supplementary washers without an original Triumph reference.

Fitment and coverage

• Compatibility: Triumph Sprint GT SE 1050 2013–2017, 1050 cc, with the matching original panels and mounting arrangements.
• Listed positions only: this kit does not include every fastener visible in an exploded drawing.
• Original fittings: retain unlisted sleeves, spacers, screen gaskets and rubber grommets. Modified panels, aftermarket screens, tail tidies and accessory brackets may require different hardware.
• Exclusions: bodywork, screens, grab racks, luggage and luggage-carriage mechanisms, screen-bracket bolts, bracket-to-frame fixings, retaining washers, seals, gaskets, sleeves, spacers, rubber grommets, chain rubbing-strip fixings, reflector fixings, internal light fixings, engine casing bolts and wheel, brake, suspension and structural chassis fasteners are not supplied.

Some catalogue panel and screen references change with VIN. VIN means Vehicle Identification Number: check the chassis identification and original fitting arrangement rather than the registration year alone. Alternative screen assemblies are not additional supplied screens or bolt sets.

The SE includes touring equipment. This fixing kit covers the listed bodywork positions with the original matching screen mounting arrangement; heated-grip internals, top-box fittings and luggage-carriage mechanisms are excluded.

Fitting information

Support the motorcycle securely and work with cool components. Keep fixings identified by location. Match the thread, length, shoulder, head clearance and washer arrangement before fitting. Start threads by hand and do not pull a misaligned panel into place with a bolt. Keep shouldered bolts in their specified positions.

Follow Triumph’s workshop procedure, tightening specification and required thread condition for each fixing. Stainless material alone does not establish equivalent mechanical strength. Apply fitting compounds only where permitted. Check panel seating, clearances, retained spacers and secure attachment before riding.

Read our guide to fitting stainless steel motorcycle bolts and browse the model range.

Customer questions

Is this one kit or ten separate kits?

One full kit, organised into ten fitting areas.

Are nylon washers included?

Yes. All 59 are included within the stated 174-piece total. Original washer callouts are already counted.

Are the screen and bodywork included?

No. Only the listed fixings are supplied.

Does this include screen-bracket or engine casing bolts?

No. Screen-bracket bolts are excluded, and engine casing bolts are a separate kit.