Top and Bottom Yoke / Triple-Clamp Pinch Bolt Kit for Tiger 900

8x stainless steel replacement bolts for the original upper and lower steering-yoke fork clamps on the Triumph Tiger 900 1999–2000. Includes 4x top-yoke and 4x bottom-yoke bolts. Browse the matching Triumph Tiger 900 1999–2000 fastener range.

What you receive

• 4x stainless steel replacement bolts — top yoke / upper fork bridge.
• 4x stainless steel replacement bolts — bottom yoke / lower fork bridge.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Fitting position / component	Supplied quantity	Original Triumph fixing reference
Top yoke / upper fork bridge	4x	T3050132
Bottom yoke / lower fork bridge	4x	A9910053
Total supplied bolts	8x	Allocated to the positions above

Important fitment notes

• Compatibility: For Triumph Tiger 900 1999–2000 with the matching original mounting arrangement.
• For the original 885i fuel-injected Tiger 900, VIN 71699–124105. This listing does not cover the earlier carburettor-model steering arrangement.
• Check before ordering: Match the original assembly and fixing references, especially if components have been modified or replaced.
• Exclusions: Yokes, fork legs, steering stem nuts, handlebar mounting bolts and front axle pinch bolts are not included.

Model-specific aftermarket replacements

Biker Bling selects these replacement fasteners for the original positions identified in the table. The Triumph references identify the original hardware being replaced, not Biker Bling product codes. These are aftermarket components, not genuine Triumph-branded parts.

Materials and appearance: The supplied bolts are stainless steel. Their heads may look different from Triumph’s originals. Stainless steel describes the material; it does not by itself establish equivalent mechanical strength.

The photographs are generic examples of the supplied hardware style. Refer to the contents table for the actual kit quantity and mounting allocation; pictured assemblies are not included.

When should you replace these fixings?

• Corroded or damaged heads: Inspect worn hardware before removal and refitting.
• Damaged threads or missing bolts: Check the original mounting threads and supporting components before replacing a fixing.
• During component servicing: Keep each bolt group with its original position and inspect the mounting faces before reassembly.

New bolts cannot repair cracked yokes, stripped threads or incorrectly seated fork legs.

Fitting information

Follow Triumph’s workshop procedure for fork position, replacement fastener specification, tightening order, torque and thread condition at each yoke. Do not assume the upper and lower positions use the same bolt or torque. Start the correct bolts by hand and never use one to pull a misaligned assembly into position. Use compounds only where specified. Confirm fork and wheel alignment and free steering movement before riding; have uncertain mountings inspected by a qualified motorcycle technician.

For general background, read our motorcycle bolt strength grades guide. Triumph’s workshop procedure takes precedence.

Customer questions

Does this include handlebar or axle clamp bolts?

No. It covers only the upper and lower yoke positions itemised above, plus one anti-seize compound pack (7 g). Handlebar and front axle fixings are separate kits.

How many bolts are supplied?

8x stainless steel bolts, allocated as shown in the contents table, plus 1x Biker Bling anti-seize compound pack (7 g).