Fairing and bodywork fixing kit for Triumph Street Triple RX 675 2015-2016

This model-specific kit brings together 110 pieces across 8 fitting areas for the Triumph Street Triple RX 675 2015-2016, 675 cc, with matching original bodywork and mounting arrangements.

The allocation covers cockpit flyscreen, side panels, tank infill, rear fairings seat cowl and undertray, rear light, front mudguard, rear hugger, chain guard.

Why choose a model-specific Street Triple RX 675 fairing bolt kit?

Replace missing or worn bodywork hardware with fixings allocated to the listed 2015-2016 Street Triple RX 675 positions. The contents distinguish fully threaded bolts, shouldered bolts, cap head replacements, small domed head bolts, captive clips, plastic rivets and flange locknuts. Original Triumph references and diagram numbers identify the positions, including the six shouldered side-panel bolts and four shouldered front-mudguard bolts.

The RX allocation follows its own seat cowl, rear bodywork, undertray and rear-light arrangement. It includes the shouldered rider-seat and seat-cowl fixings shown on the RX drawing.

When should you replace fairing and bodywork fixings?

Inspect hardware when removing panels or servicing the listed bodywork areas. Replace missing fixings and damaged heads, threads, nuts or clips with the appropriate type. New fixings cannot repair cracked panels, enlarged holes or damaged mounting threads.

What you receive

• 20x fully threaded bolts.
• 36x nylon washers.
• 18x shouldered bolts.
• 6x cap head bolts.
• 6x plastic rivets / clips.
• 10x small domed head bolts.
• 13x spire clips / captive nuts.
• 1x flange locknuts.

Total: 110 pieces. All listed nylon washers are included in this total.

Model-specific kit contents

Fitting area	Component	Quantity	Original Triumph reference / position	Diagram item
Cockpit flyscreen	Fully threaded bolts	3x	T3330726	3
Cockpit flyscreen	Fully threaded bolts	4x	T3330943	4
Cockpit flyscreen	Nylon washers	7x	Supplementary supplied washers	+
Side panels	Shouldered bolts	6x	T3331061	15
Side panels	Fully threaded bolts	2x	T3330726	16
Side panels	Cap head bolts	2x	T3203222	17
Side panels	Plastic rivets / clips	4x	T3701170	18
Side panels	Cap head bolts	4x	T3205063	19
Side panels	Small domed head bolts	2x	T3331042	20
Side panels	Spire clips / captive nuts	4x	T3350123	22
Side panels	Spire clips / captive nuts	2x	T3350111	23
Side panels	Flange locknuts	1x	T3350003	25
Side panels	Nylon washers	10x	Supplementary supplied washers	+
Tank infill	Fully threaded bolts	2x	T3330943	32
Tank infill	Spire clips / captive nuts	2x	T3350129	31
Tank infill	Nylon washers	2x	Supplementary supplied washers	+
Rear fairings seat cowl and undertray	Shouldered bolts	2x	T3330858	3
Rear fairings seat cowl and undertray	Shouldered bolts	4x	T3331061	7
Rear fairings seat cowl and undertray	Plastic rivets / clips	2x	T3701121	13
Rear fairings seat cowl and undertray	Fully threaded bolts	2x	T3330726	14
Rear fairings seat cowl and undertray	Fully threaded bolts	2x	T3330727	15
Rear fairings seat cowl and undertray	Small domed head bolts	4x	T3330334	16
Rear fairings seat cowl and undertray	Shouldered bolts	2x	T3331061	17
Rear fairings seat cowl and undertray	Spire clips / captive nuts	4x	T3350129	18
Rear fairings seat cowl and undertray	Nylon washers	8x	Supplementary supplied washers	+
Rear light	Fully threaded bolts	2x	T3330943	10
Rear light	Nylon washers	2x	Supplementary supplied washers	+
Front mudguard	Shouldered bolts	4x	T3330848	2
Rear hugger	Small domed head bolts	4x	T3331044	3
Rear hugger	Spire clips / captive nuts	1x	T3351021	4
Rear hugger	Nylon washers	4x	Supplementary supplied washers	+
Chain guard	Fully threaded bolts	2x	T3330727	8
Chain guard	Fully threaded bolts	1x	T3330726	25
Chain guard	Nylon washers	3x	Supplementary supplied washers	+

Original Triumph references identify the original positions. Supplied components are aftermarket replacements and are not genuine Triumph-branded stock. Replacement head style, drive or material may differ from the original. Component photographs illustrate hardware styles; compatibility and allocation are defined by this model-specific contents table and fixing diagrams.

Component styles and fitting details

The listed component styles include fully threaded bolts, nylon washers, shouldered bolts, cap head bolts, plastic rivets / clips, small domed head bolts, spire clips / captive nuts, flange locknuts. Use the contents table and diagram numbers to identify each included position. Hardware photographs are representative; the model-specific contents and matching diagrams define the allocation. Nuts, clips and washers retain their stated materials.

Read our guide to generic and model-specific motorcycle bolt kits.

Nylon washer allocation

The 36 nylon washers provide one washer per included non-shouldered bolt. Supplementary washers are identified by a plus sign on the diagrams. Shouldered bolts receive no supplementary nylon washer. Retain the original rubber mounts, stand-offs, sleeves, spacers and retaining washers.

Fitment and VIN notes

For the Triumph Street Triple RX 675 2015-2016, 675 cc, with the low-mounted exhaust and matching original bodywork. The catalogue group starts at VIN 560477. VIN means Triumph’s frame-number sequence used to distinguish catalogue variants; it is different from the registration year. Earlier high-exhaust models belong to a different group.

The RX is the 2015–2016 model with the Daytona-style tail. The shared R/RX catalogue covers frame numbers through 806645, but its earlier R years do not make the RX a 2013–2014 model.

Catalogue breakpoints 657136/657137 and later paint or market references identify panel variants. The listed fixing allocation covers the matching original arrangements shown in the diagrams across this year group.

Front mudguard coverage: the kit includes the four shouldered bolts used on the UK/non-reflector arrangement. US, Canadian, Argentinian and South African reflector arrangements use two longer reflector-mount bolts that are not included. Retain the correct original reflector hardware.

What is retained or excluded?

Retain original rubber fittings, sleeves, spacers, unlisted brackets and retaining washers. Headlight and instrument mounts, fir-tree clips, structural frame and subframe fixings, number-plate lamp and reflector hardware, fuel cap, fuel pump, main fuel-tank mounts, belly-pan fixings and engine casing bolts are excluded.

The RX front-bridge fixing positions and standard/R grab-handle hardware are excluded. Rear bodywork fixings are counted once, including the listed undertray positions.

Fitting guidance

Compare each removed fixing with the replacement for its listed position. Check thread engagement, head clearance and the original sleeve or shoulder arrangement before fitting. Follow Triumph’s workshop procedure and tightening specifications. Use a suitable stainless-steel anti-seize compound where appropriate.

Read our guide to generic and model-specific motorcycle bolt kits and guide to fitting stainless steel motorcycle bolts.

Customer questions

Is this one complete kit?

Yes. One 110-piece kit covers the 8 listed fitting areas, subject to the stated original equipment and market arrangement.

Does it include nylon washers?

Yes. All 36 washers are included in the total. Shouldered bolts retain their original mounting arrangement.

Are the photographs specific to every fixing?

The component photographs illustrate hardware styles. Use the original references, quantities and matching diagrams to identify the allocated positions.

Is this the same kit as the Street Triple R?

The RX kit has its own rear bodywork, seat-cowl and rear-light allocation. Use the RX diagrams rather than the standard/R rear diagrams.

Are engine casing bolts included?

No. Engine casing bolts are available as a separate kit.