Handlebar mounting bolts for Honda NM4 Vultus 2014–2015

These replacement bolts secure the original upper handlebar-holder caps. They are selected for those mounting positions, separate from the upper and lower fork-yoke clamps. Browse the matching Honda NM4 Vultus 2014–2015 fastener range.

What you receive

• 4x stainless steel replacement bolts for upper handlebar holder caps.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Honda fixing references

This kit covers the four upper handlebar-holder cap bolts, not the lower riser mounting nuts, top-yoke pinch bolts, steering stem nut or ignition-lock fixings. Handlebars and holders are not included.

These references identify Honda’s original fixing positions, not Biker Bling product codes. The supplied items are aftermarket replacements, not genuine Honda parts.

Important fitment notes

• For the matching original components on Honda NM4 Vultus 2014–2015. Check the exact model and existing fitting before installation.
• Aftermarket or modified assemblies may need different hardware.
• Product photos can be generic bolt illustrations. Use the itemised contents and fixing positions for the supplied allocation.

Materials and head style: The replacement bolts are stainless steel. Head appearance may differ from the original Honda fasteners. The material name alone does not establish mechanical-strength equivalence.

When should you replace these fixings?

• Inspect damaged drive recesses, corroded hardware and worn threads during servicing.
• Check the component, mounting faces and threads if a fixing is loose or will not tighten correctly.
• Replacement bolts cannot repair a cracked component, stripped thread or damaged mounting.

Fitting information

Position the holders correctly and follow Honda’s specified fastener, alignment, thread condition, tightening order and torque. Never pull a misaligned holder into place with a bolt. Check secure handlebars, normal throttle return and cable/hose clearance at both steering locks before riding.

The separate anti-seize pack is included with the kit. Use fitting compounds only where the applicable motorcycle or component instructions specify them. It is not an instruction to lubricate hydraulic sealing faces or every threaded fixing. Have uncertain work carried out or checked by a qualified motorcycle technician.

For general background, read our motorcycle bolt strength grades guide. Honda’s exact service procedure takes precedence.

Customer questions

Does this include the lower riser fixings?

No. This kit supplies the four upper handlebar-holder cap bolts. Lower mounting nuts and yoke pinch bolts are separate.

Where should I use the anti-seize compound?

Use it only where the relevant motorcycle or component instructions specify a suitable thread treatment. Inclusion of the pack is not an instruction to lubricate every fixing.