Radiator Mounting Bolt Kit for Daytona T595

2x stainless steel replacement bolts for the original water radiator mounting positions shown in the listing drawing. Designed for the Triumph Daytona T595 1996–1999.

What you receive

• 2x stainless steel bolts for the positions listed below.
• 1x Biker Bling anti-seize compound pack (7 g).

Original Triumph fixing references

Important fitment notes

• For Triumph Daytona T595 1996–1999 with the original water radiator mountings shown in the listing drawings.
• Check the exact motorcycle and original components before fitting. Modified or aftermarket assemblies may require different hardware.
• Radiator, brackets, rubbers, spacers, hoses, drain plugs and coolant-system components are not included.
• The contents tables define the supplied hardware. Photographs illustrate the hardware style and fitting positions and may be generic.

Model-specific aftermarket replacements

Biker Bling selects these replacement components for the listed original fixing positions. The Triumph references identify original components, not Biker Bling product codes. These are aftermarket replacement parts, not genuine Triumph-branded components.

Materials and appearance: The supplied metal replacement fasteners are stainless steel. Their appearance may differ from the original Triumph hardware. Stainless material alone does not establish equivalent mechanical strength.

When should you replace these fixings?

• Corroded or damaged hardware: Inspect worn heads, damaged threads and supporting parts at the listed fixing positions.
• Missing fixings: Restore the correct mounting arrangement with suitable replacement hardware.
• Component servicing: Check the surrounding mounting points before reassembly.

Replacement hardware cannot repair cracked components, stripped threads or damaged mounting faces. Identify the cause of looseness or leakage before refitting.

Fitting information

Support the radiator and retain sound original rubbers, spacers and brackets as Triumph specifies. Match each bolt to its listed mounting group. Follow the workshop procedure for alignment, tightening and thread condition; do not use a bolt to pull a distorted bracket into position. Use compounds only where appropriate. Check the radiator is secure and hoses are not strained. If the coolant circuit is opened, follow the specified refilling, bleeding and leak-check procedure.

For general guidance, read our stainless steel motorcycle bolt fitting guide. Triumph’s workshop procedure takes precedence.

Customer questions

Are coolant drain bolts included?

No. These are the two radiator mounting bolts listed in the table, plus one anti-seize compound pack (7 g).

Can mounting bolts repair a leaking radiator?

No. Inspect the radiator, hoses and seals to identify a coolant leak separately.